Menu
Menu
$ 30.36
PEPPERL+FUCHS Diffuse mode sensors are particularly easy to install, since only one device has to be fitted and no reflector is required. These sensors operate primarily at close range, feature optimum switching accuracy, and can reliably detect even very small objects. The sensors with background suppression sense only a specific area in front of the sensor. The sensor ignores any objects that are outside of this area. Sensors with background suppression are also insensitive to interfering objects in the background and are still extremely precise. Sensors with background evaluation are always used in applications with a fixed background in the measuring range with which you can align the sensor.
| General specifications | |
|---|---|
| Detection range | 0 … 500 mm |
| Reference target | standard white 200 mm x 200 mm |
| Light source | IRED , 880 nm |
| Light type | infrared |
| Diameter of the light spot | approx. 80 mm at 500 mm |
| Ambient light limit | 10000 Lux |
| Indicators/operating means | |
| Operation indicator | LED green |
| Function indicator | Dual color-LED, yellow/green yellow: switch state green: power on flashing: stability control |
| Control elements | Sensing range adjuster |
| Electrical specifications | |
| Operating voltage | 10 … 30 V DC , class 2 |
| Ripple | 10 % |
| No-load supply current | ≤ 25 mA |
| Time delay before availability | ≤ 25 ms |
| Output | |
| Switching type | light/dark on electrically switchable |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2.5 V |
| Switching frequency | 500 Hz |
| Response time | 1 ms |
| Conformity | |
| Product standard | EN 60947-5-2 |
| Standard conformity | |
| Standards 2 | UL 508 |
| Approvals and certificates | |
| UL approval | cULus Listed, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Approvals | CE, cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| Ambient conditions | |
| Ambient temperature | -25 … 55 °C (-13 … 131 °F) |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications | |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | brass, nickel-plated |
| Optical face | PC |
| Mass | 110 g |
| Weight | 0.110 kg |
|---|
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
