NX5 Series – Compact Multi-voltage Photoelectric Sensor – Panasonic Photoelectric Sensors / Laser Sensors
USD $ 48.30 – USD $ 49.35
SKU: N/A
Features
Multi-voltage
|
The NX5 series can operate at 24 to 240 V AC or 12 to 240 V DC, which makes it suitable for supply voltages around the world. |
 |
Compact size
|
Despite of being multi-voltage, it has a depth of just 35 mm 1.378 in. (W18 x H62 x D35 mm W0.709 x H2.441 x D1.378 in) |
 |
Long sensing range
|
It is most suitable for conveyor lines and parking lot applications. |
 |
High reliability
|
It has an IP66 protection. Moderate dust or water splashes will not affect the sensor. The hermetically sealed output relay significantly increases its reliability. |
 |
Easy alignment
The 10 m 32.808 ft thru-beam type sensor incorporate a red LED beam source. Beam alignment can be attained by checking the emitted beam visually.
Interference prevention
Two sensors can operate normally even if mounted close together.
(Excluding the 30 m 98.425 ft thru-beam type sensor)
Specifications
| Type | Thru-beam | ||||
|---|---|---|---|---|---|
| Long sensing range | |||||
| Model No. | NX5-M10RA | NX5-M10RB | NX5-M30A | NX5-M30B | |
| Regulatory compliance | ・Low Voltage Directive ： EN IEC 60947-5-2 ・EMC Directive ： EN IEC 60947-5-2 ・RoHS Directive ・GB/T 14048.10 |
||||
| Sensing range | 10 m 32.808 ft |
30 m 98.425 ft |
|||
| Sensing object | φ20 mm φ0.787 in or more opaque object (Note 2) |
φ20 mm φ0.787 in or more opaque object (Completely beam interrupted object) (Note 2) |
|||
| Hysteresis | – | ||||
| Repeatability (perpendicular to sensing axis) |
0.1 mm 0.004 in or less | 0.2 mm 0.008 in or less | |||
| Supply voltage | 24 to 240 V AC +10–15 % or 12 to 240 V DC +10–15 % Ripple P-P 10 % or less | ||||
| Power consumption | Emitter: 1 VA or less Receiver: 2 VA or less |
Emitter: 1.5 VA or less Receiver: 2 VA or less |
|||
| Output | Relay contact 1 c • Switching capacity: 250 V AC 1 A (resistive load) 30 V DC 2 A (resistive load) • Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour) 100,000 or more switching operations (switching frequency 3,600 operations/hour) • Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour) |
||||
| Output operation | Light-ON | Dark-ON | Light-ON | Dark-ON | |
| Response time | 10 ms or less | ||||
| Operation indicator | Red LED (lights up when the output is ON) | ||||
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
||||
| Power indicator | – | Red LED (lights up when the power is ON) |
|||
| Sensitivity adjuster | Continuously variable adjuster | – | |||
| Automatic interference prevention function |
(Use optional interference prevention filters) |
– | |||
| Pollution degree | 3 (Industrial environment) | ||||
| Protection | IP66 (IEC) | ||||
| Ambient temperature | –20 to +55 ℃ –4 to +131 ℉ (No dew condensation or icing allowed) (Note 3), Storage: –30 to +70 ℃ –22 to +158 ℉ |
||||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
| Ambient illuminance | Incandescent light: 3,500 Lx or less at the light-receiving face | ||||
| Voltage withstandability | 1,500 V AC for one min. between all supply terminals connected together and enclosure, 1,500 V AC for one min. between power supply and output terminals, 1,000 V AC for one min. between relay contact terminals |
||||
| Insulation resistance | 20 MΩ, or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals | ||||
| Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions two hours each | ||||
| Shock resistance | 500 m/s2 (50 G approx.) in X, Y and Z directions three times each | ||||
| Emitting element | Red LED (modulated) | Infrared LED (modulated) | |||
| Peak emission wavelength |
660 nm 0.026 mil | 880 nm 0.035 mil | |||
| Material | Enclosure: Polycarbonate, Lens: Polycarbonate, Cover: Polycarbonate | ||||
| Cable | 0.3 mm2 5-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | ||||
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver). | ||||
| Net weight | Emitter: 100 g approx. Receiver: 140 g approx. |
Emitter: 125 g approx. Receiver: 140 g approx. |
|||
| Accessories | Adjusting screwdriver: 1 pc. | – | |||
Notes:
| 1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
|---|---|
| 2) | If slit masks (optional) are fitted, an object as small as 3 x 6 mm 0.118 x 0.236 in can be detected. |
| 3) | In case the sensor is to be used at an ambient temperature of –15 ℃ +5 ℉, or less, please contact our office. |
