1. Centralized PLC to Valve Manifold Integration in Dry Packaging Lines
Utilizing the 5-meter connecting cable to wire a centralized Programmable Logic Controller (PLC) to a remote Festo VTUG valve terminal on a carton-erecting machine. The open-end conductors are terminated at the PLC output card, while the 25-pin Sub-D connector attaches directly to the valve manifold's VAEM multi-pin interface.
Problem SolvedEliminates the need to individually hardwire dozens of pneumatic solenoid valves, drastically reducing panel clutter, installation time, and the risk of termination errors in complex multi-actuator packaging equipment.
25-pin Sub-D socket24V DC2.6 A current rating5 m cable lengthIP40 protectionDIN 47100 color coding
2. Discrete I/O Retrofit for Electronics Assembly Pneumatics
Acting as the primary signal bridge during a pneumatic system upgrade in an active PCB routing machine, connecting legacy discrete PLC output terminals to a modern, high-density Festo multi-pin valve manifold.
Problem SolvedProvides a seamless transition from bare discrete PLC output terminals to a modern Sub-D interface without requiring bulky intermediate junction boxes, simplifying the retrofit process for aging machinery.
Open end connection25 x 0.34 mm² cable structure2.4 kV surge immunity0 V to 30 V DC operational voltageCut off bluntly wire ends
3. Compact Pneumatic Signal Routing in Laboratory Automation
Routing 24V DC actuation signals from an internal control cabinet to a pneumatic manifold that operates fluid dispensing micro-cylinders inside an automated laboratory diagnostic machine.
Problem SolvedSolves the challenge of routing disorganized, individual wires through compact equipment chassis by replacing them with a single multi-core cable that safely navigates tight internal spaces without signal loss.
≥42 mm fixed bending radius10.2 mm cable diameterCRC 0 corrosion resistancePVC cable sheath-5 °C to 80 °C moving ambient temperature
