1. Automotive Engine Assembly Pneumatic Tool Station
Serves as the primary air preparation unit for a workstation powering multiple pneumatic nutrunners and impact wrenches on an engine assembly line. The unit filters the main line air and regulates it to a safe operating pressure for the tools.
Problem SolvedPrevents over-pressurization of expensive pneumatic tools which are typically rated for 6.3 bar, using the specific 'D6' pressure range (max 7 bar) to act as a safety limit while delivering the high flow (6200 l/min) required for simultaneous tool operation.
6200 l/min flow rate0.3 - 7 bar regulation40 µm filtrationG1/2 portManual condensate drain
2. Automated Palletizer Main Air Supply
Acts as the main service unit for an end-of-line packaging palletizer, conditioning air for large pneumatic cylinders and vacuum ejectors used to stack heavy boxes onto pallets.
Problem SolvedEnsures consistent actuation speed and force for heavy lifting cycles by maintaining stable pressure under high demand. The 40µm filter protects solenoid valves from compressor scale, and the manual drain is suitable for accessible, operator-monitored packaging zones.
High flow capacityPlastic bowl guardVertical mountingISO 8573-1:2010 [7:4:4]Pressure hysteresis 0.25 bar
3. CNC Machining Center Workpiece Clamping
Regulates air pressure for pneumatic vises and clamps inside a CNC milling machine. The unit ensures the clamping force is sufficient to hold the part but low enough to prevent deformation of sensitive materials.
Problem SolvedProvides precise low-pressure control (down to 0.3 bar if needed) for delicate parts, while the robust die-cast aluminium housing and plastic bowl guard offer protection against the harsh environment of a machine shop containing flying chips and coolant mist.
0.3 - 7 bar pressure rangeDie-cast aluminium housingVibration resistance40 µm pore sizeG1/2 connection
