Modicon STB – Network Interface Modules – Schneider Modules
$ 296.56
SKU: STBNIB2212
Specifications
Main | |
Part Number | STBNIB2212 |
Range of product | Modicon STB distributed I/O solution |
Product or component type | Standard Network Interface Module |
integrated connection type | Interbus conforming to InterBus Club 9-way male isolated RS485 SUB-D 1 twisted shielded pair (input bus) |
Interbus conforming to InterBus Club 9-way female isolated RS485 SUB-D 1 twisted shielded pair (output bus) | |
Interbus conforming to InterBus Club HE-13 (RS232 port) | |
Interbus conforming to InterBus Club 8-way female (RS232 port) | |
Number of segments | 1 primary, maximum 6 extensions |
Number of slave | 512 |
transmission rate | 500 kbit/s for bus length of 0…12800 m for the bus between stations |
500 kbit/s for bus length of 0…400 m per bus segment between stations | |
500 kbit/s for bus length of 0…50 m for the installation bus | |
Structure type | Industrial field bus (Generation4) |
Complementary | |
number of addressable I/O module | 0…32 per island |
Communication service | Implicit exchange of process data |
Logical addressing | |
Diagnostics | |
[Us] rated supply voltage | 24 V DC |
Power supply type | SELV |
Maximum supply current | 700 A |
Supply voltage limits | 19.2…30 V |
input current | 430 mA for supply circuit |
nominal output current | 0.575 A at 60…70 °C |
1.2 A | |
maximum output impedance | 0.05 Ohm at 100000 kHz |
output voltage | 5.25 V DC (tolerance: +/- 0.21 %) for logic bus |
Marking | CE |
Overvoltage category | II |
status LED | 1 LED (green) BA |
1 LED (green) island state (RUN) | |
1 LED (green) power supply (PWR) | |
1 LED (green) RC | |
1 LED (red) module error (ERR) | |
1 LED (red) RD | |
1 LED (yellow) test mode | |
Depth | 70 mm |
Height | 40 mm |
Width | 128.3 mm |
Product weight | 0.155 kg |
Environment | |
electromagnetic compatibility | Immunity to electromagnetic interference conforming to IEC 61131-2 |
Product certifications | CSA |
C-Tick | |
UL | |
FM Class 1 Division 2 | |
ATEX Cat 3G | |
pollution degree | 2 conforming to IEC 60664-1 |
Operating altitude | <= 2000 m |
IP degree of protection | IP20 conforming to EN 61131-2 class 1 |
ambient air temperature for operation | 0…60 °C (without derating) |
-25…70 °C (with derating factor) | |
Ambient air temperature for storage | -40…85 °C |
relative humidity | 95 % at 60 °C without condensation |
vibration resistance | 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail |
5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail | |
+/-0.35 mm at 10…58 Hz | |
shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
Packing Units | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 2.5 cm |
Package 1 Width | 8.0 cm |
Package 1 Length | 13.0 cm |
Package 1 Weight | 135.0 g |
Unit Type of Package 2 | S02 |
Number of Units in Package 2 | 30 |
Package 2 Height | 15.0 cm |
Package 2 Width | 30.0 cm |
Package 2 Length | 40.0 cm |
Package 2 Weight | 4.05 kg |
Contractual warranty | |
Warranty | 18 months |
Weight | 0.155 kg |
---|---|
Dimensions | 7.0 × 12.83 × 4.0 cm |