PEPPERL+FUCHS Diffuse mode sensors are particularly easy to install, since only one device has to be fitted and no reflector is required. These sensors operate primarily at close range, feature optimum switching accuracy, and can reliably detect even very small objects. The sensors with background suppression sense only a specific area in front of the sensor. The sensor ignores any objects that are outside of this area. Sensors with background suppression are also insensitive to interfering objects in the background and are still extremely precise. Sensors with background evaluation are always used in applications with a fixed background in the measuring range with which you can align the sensor.
General specifications |
Switching function |
Normally open (NO) |
Output type |
PNP |
Rated operating distance |
15 mm |
Installation |
flush |
Output polarity |
DC |
Assured operating distance |
0 … 12.15 mm |
Actuating element |
mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
45 mm x 45 mm x 1 mm |
Reduction factor rAl |
0.45 |
Reduction factor rCu |
0.43 |
Reduction factor r304 |
0.73 |
Reduction factor rBrass |
0.53 |
Output type |
3-wire |
Nominal ratings |
Operating voltage |
5 … 36 V |
Switching frequency |
0 … 550 Hz |
Hysteresis |
typ. 5 % |
Reverse polarity protection |
reverse polarity protected |
Short-circuit protection |
pulsing |
Voltage drop |
≤ 1 V |
Operating current |
0 … 200 mA |
Off-state current |
max. 20 µA |
No-load supply current |
≤ 10 mA |
Time delay before availability |
≤ 10 ms |
Switching state indicator |
LED, yellow |
Functional safety related parameters |
MTTFd |
1707 a |
Mission Time (TM) |
20 a |
Diagnostic Coverage (DC) |
0 % |
Conformity |
PWIS conformity |
VDMA 24364-C1/T100°C-W |
Compliance with standards and directives |
Standard conformity |
|
Standards |
EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012 |
Approvals and certificates |
Protection class |
II |
Rated insulation voltage |
36 V |
Rated impulse withstand voltage |
500 V |
UL approval |
cULus Listed, General Purpose, Class 2 Power Source |
CCC approval |
CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature |
-40 … 85 °C (-40 … 185 °F) |
Storage temperature |
-40 … 85 °C (-40 … 185 °F) |
Mechanical specifications |
Connection type |
cable |
Housing material |
brass , white bronze coated |
Sensing face |
PBT , green |
Degree of protection |
IP68 |
Cable |
|
Wire end ferrules |
yes |
Cable diameter |
4.3 mm ± 0.15 mm |
Bending radius |
> 10 x cable diameter |
Material |
PVC |
Color |
black |
Number of cores |
3 |
Core cross section |
0.34 mm2 |
Length |
2 m |
Mass |
193 g |
Tightening torque |
0 … 30 Nm |
General information |
Scope of delivery |
2 self locking nuts in scope of delivery |
Associated Products: ML100-8-1000-RT/103/115
Accessories |
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm … 3 mm
|
|
|
|
Mounting aid for ML100 series, Mounting bracket
|
|
|
|
Mounting aid for ML100 series, Mounting bracket
|
|
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm … 3 mm
|
|
|
|
Mounting aid for ML100 series, Mounting bracket
|
|
|
|
Mounting aid for ML100 series, Mounting bracket
|
|
|
|
Mounting aid for ML100 series
|
|
|
|
Mounting aid for ML100 series
|
|
|
|
Mounting bracket
|
|