Menu
Menu
$ 362.78
Inosaki is one of the largest Phoenix Contact Distributors to provide terminal block, interface module, power supply and relay. And our best offer for terminal block types are Feed-through, Fuse Modular, Spring Cage, Double Level, and Multi-level, hence the series model references to PT Series, ST Series, TB Series, UT Series, UK Series. In additional for power supply are QUINT Power, STEP Power, Trio Power, and UNO Power. Please email us for catalog: sales@inosaki.com
| DC operation | |
| Input voltage | 24 V DC |
| Input voltage range | 100 V DC … 350 V DC |
| Voltage type of supply voltage | DC |
| Inrush current | < 34 A (< 1.1 A2s) |
| Inrush current integral (I2t) | < 1.1 A2s |
| Mains buffering time | see diagram |
| Buffer period | 20 min. (2 A) |
| Rotary selector switch | Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent |
| Current consumption | 0.6 A |
| 0.85 A (230 V AC) | |
| 1.1 A | |
| 1.5 A (120 V AC) | |
| Protective circuit | Varistor |
| Power factor (cos phi) | approx. 0.5 |
| Typical response time | 100 ms |
| Input fuse | 3.15 A (slow-blow, internal) |
| Permissible backup fuse | B6 B10 B16 |
| Recommended breaker for input protection | 6 A … 16 A (Characteristics B, C, D, K) |
| AC operation | |
| Nominal input voltage range | 100 V AC … 240 V AC |
| Input voltage range | 85 V AC … 264 V AC |
| Voltage type of supply voltage | AC |
| Efficiency | > 83 % |
| Nominal output voltage | 24 V DC (AC input voltage available: 22.5 to 29.5 V DC, AC input voltage not available: 27.9 to 19.2 V DC) |
| Setting range of the output voltage (USet) | 22.5 V DC … 29.5 V DC (normal mode; in the buffer mode, dependent on a battery voltage of 27.9 V DC … 19.2 V DC) |
| Nominal output current (IN) | 2 A |
| Output current limit | max. 3 A |
| Bridging time | 1200 s |
| Derating | 60 °C … 70 °C (2.5%/K) |
| Feedback voltage resistance | 35 V DC |
| Protection against overvoltage at the output (OVP) | < 35 V DC |
| Max. capacitive load | unlimited |
| Control deviation | < 1 % (change in load, static 10 % … 90 %) |
| Residual ripple | < 50 mVPP |
| Output power | 48 W |
| Peak switching voltages nominal load | < 100 mVPP |
| Maximum no-load power dissipation | 3.8 W |
| Power loss nominal load max. | 15 W |
| Power dissipation | 3.8 W |
| 10.1 W | |
| 2.1 W | |
| Rise time | < 100 ms |
| Connection in parallel | yes |
| Connection in series | No |
| Mains operation | |
| Nominal output voltage | 24 V DC |
| Output voltage range | 22.5 V DC … 29.5 V DC |
| Nominal output current (IN) | 2 A |
| Battery operation | |
| Nominal output voltage | 24 V DC |
| Output voltage range | 19.2 V DC … 27.6 V DC (UOUT = UBAT – 0,5 V DC) |
| Nominal output current (IN) | 2 A |
| Signal: Active (high = buffer module is loaded) | |
| Output description | Power Good |
| Maximum switching voltage | ≤ 24 V |
| Output voltage | + 24 V |
| Continuous load current | ≤ 20 mA |
| Signal: Alarm | |
| Output description | Relay output |
| Maximum switching voltage | ≤ 24 V |
| Output voltage | 24 V |
| Continuous load current | ≤ 200 mA |
| Signal: Battery charge | |
| Output description | Relay output |
| Maximum switching voltage | ≤ 24 V |
| Output voltage | 24 V |
| Continuous load current | ≤ 200 mA |
| Signal: Battery mode | |
| Output description | Relay output |
| Maximum switching voltage | ≤ 24 V |
| Output voltage | 24 V |
| Continuous load current | ≤ 200 mA |
| Input | |
| Connection method | Pluggable COMBICON screw connections |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 12 |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
| Output | |
| Connection method | Pluggable COMBICON screw connections |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 12 |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
| Signal | |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 12 |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
| Width | 67.5 mm |
| Height | 99 mm |
| Depth | 107 mm |
| Item number | 2866640 |
| Packing unit | 1 pc |
| Minimum order quantity | 1 pc |
| Sales Key | CM20 |
| Product Key | CMUM13 |
| Catalog Page | Page 350 (C-4-2019) |
| GTIN | 4046356113533 |
| Weight per Piece (including packing) | 496 g |
| Weight per Piece (excluding packing) | 447 g |
| Customs tariff number | 85371091 |
| Country of origin | CN |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C … 70 °C (> 60 °C Derating: 2,5 %/K) |
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Max. permissible relative humidity (operation) | 95 % (at 25 °C, non-condensing) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| 15 Hz … 150 Hz, 2.3g, 90 min. |
| Weight | 0.447 kg |
|---|---|
| Dimensions | 10.7 × 6.75 × 9.9 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
