Menu
Menu
$ 85.80 – $ 211.42
| Type | Cable type | Plug-in connector type | |
|---|---|---|---|
| Model No. | NPN output | LX-101 | LX-101-Z |
| PNP output | LX-101-P | LX-101-P-Z | |
| CE marking directive compliance | EMC Directive, RoHS Directive | ||
| Sensing range | 10 ± 3 mm 0.394 ± 0.118 in | ||
| Spot size | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) | ||
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||
| Current consumption | Normal mode: 750 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
||
| Output 1 (OUT) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) |
|
| Short-circuit protection | Incorporated | ||
| Output operation | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching), Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) |
||
| Output 2 (OUT) |
<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current) |
– | |
| Short-circuit protection | Incorporated | – | |
| Output operation | Inverted operation of the output 1 | – | |
| Response time | Mark mode: 45 μs or less, Color mode: 150 μs or less | ||
| Teaching input | <NPN output type> NPN non-contact input ・Signal condition: High… +5 V to +V, or open Low… 0 to +2 V (source current: 0.5 mA or less) ・Input impedance: 10 kΩ approx. <PNP output type> PNP non-contact input ・Signal condition: High… +4 V to +V (sink current: 3 mA or less) Low… 0 to +0.6 V, or open ・Input impedance: 10 kΩ approx. |
||
| Digital display | 4-digit red LED display | ||
| Sensitivity setting | Mark mode: 2-level teaching / Full-auto teaching, Color mode: 1-level teaching | ||
| Fine sensitivity adjustment function | Incorporated | ||
| Timer function | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) |
||
| Protection | IP67 (IEC) | ||
| Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
||
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
| Ambient illuminance | Incandescent light: 3,000 or less lx at the light-receiving face | ||
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||
| Vibration resistance | 10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each | ||
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | ||
| Emitting element | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) | ||
| Material | Enclosure: PBT, Display cover: Polycarbonate, Operation buttons: Silicone rubber, Lens: Glass, Lens holder: Aluminum | ||
| Cable | 0.2 mm2 5-core cabtyre cable, 2 m 6.562 ft long |
(Note 2) | |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
||
| Weight | Net weight: 120 g approx., Gross weight: 180 g approx. |
Net weight: 55 g approx., Gross weight: 120 g approx. |
|
| Accessory | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. | ||
| Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉ . |
|---|---|
| Note 2 : | Mating cable is not supplied with the plug-in connector type. Please order it separately. |
(Unit: mm in) |
||
|---|---|---|
| Setting distance L (Note 1) |
Spot size (Note 2) | |
| Width (W) | Length (D) | |
| 7 0.276 | 2.0 0.079 | 5.5 0.217 |
| 8 0.315 | 1.7 0.067 | 5.5 0.217 |
| 9 0.354 | 1.2 0.047 | 5.3 0.209 |
| 10 0.394 | 1.0 0.039 | 5.0 0.197 |
| 11 0.433 | 1.3 0.051 | 5.0 0.197 |
| 12 0.472 | 1.5 0.059 | 5.0 0.197 |
| 13 0.512 | 2.0 0.079 | 5.0 0.197 |
Notes:
| 1) | Setting distance “L” represents the distance from the lens surface to the sensing object. |
|---|---|
| 2) | Examples only meant for use as a guideline. |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
