LOCTITE® SI 5900 is a low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits a rapid skin-over time of 15 min and is suitable for gaps up to 1 mm. As a single component it requires no mixing.

• Good oil resistance
• Withstands joint movement
• Reduces migration of liquid after application
• Adheres to metal, plastic, glass and ceramic materials

LOCTITE® SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps).

• Good resistance to oil and joint movement
• Can be supplied in cartridges, tubes or rocep cans
• For use with flexible flanges
• Reduces migration of liquid after application

LOCTITE® SI 5920 is a low strength, silicone-based gasketing product. It is used on flexible flanges with machined or cast surfaces and is particularly suitable for high temperature applications up to 350°C. It can be applied in gaps measuring up to 1 mm and is used in electrical insulating applications.

• For use with flexible flanges
• Suitable for high temperature applications
• Moisture curing
• Non-corrosive

Volume: 300ml

LOCTITE® SI 5970 is a silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is designed primarily for flexible flange sealing. It is ideally used where high vibration or flexing occurs. It is tack-free after just 25 min. The product can be used on machined or cast surfaces, metal, plastic or painted parts.

• Replacement for cork and paper cut gaskets on flanges and stamped sheet metal covers
• Can be used with plastic and painted parts
• Tack-free after 25 min.
• Ideal for use where high vibration or flexing occurs