Menu
Menu
$ 422.84
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase), an output current of 12A, nominal power of 2kW and continuous power of 2000W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 62mm (width) x 184mm (depth) x 170mm (height). It weighs 1.7kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 4 motor stacks) at 2000W and servo motor BCH2 (100mm, 2 motor stacks) at 2000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
| Main | |
| Part Number | LXM28AU20M3X |
| range of product | Lexium 28 |
| product or component type | Motion servo drive |
| device short name | LXM28A |
| format of the drive | Compact housing |
| line current | 8.7 A 137.1 % at 220 V, three phase |
| Complementary | |
| network number of phases | Three phase |
| [Us] rated supply voltage | 220 V (- 10…15 %) for three phase |
| supply voltage limits | 200…255 V three phase |
| supply frequency | 50/60 Hz – 5…5 % |
| network frequency | 47.5…63 Hz |
| EMC filter | Without EMC filter |
| continuous output current | 12 A at 8 kHz |
| output current 3s peak | 36 A at 220 V |
| continuous power | 2000 W at 220 V |
| nominal power | 2 kW at 220 V 8 kHz |
| switching frequency | 8 kHz |
| overvoltage category | III |
| maximum leakage current | 1.35 mA |
| output voltage | <= power supply voltage |
| electrical isolation | Between power and control |
| type of cable | Shielded motor cable (temperature: 0…55 °C) copper |
| electrical connection | Spring terminal, clamping capacity: 3.3…4 mm², AWG 12 (L1-L2) |
| Spring terminal, clamping capacity: 3.3…4 mm², AWG 12 (R, S, T) | |
| Spring terminal, clamping capacity: 3.3…4 mm², AWG 12 (U, V, W, PE) | |
| Spring terminal, clamping capacity: 3.3…4 mm², AWG 12 (PA/+, PBe) | |
| discrete input number | 8 programmable (CN1) |
| 1 pulse train input (PTI) (CN1) | |
| 2 fast capture (CN1) | |
| 1 safety function STO (CN9) | |
| discrete input voltage | 24 V DC for logic |
| discrete input logic | Positive or negative (CN1) |
| discrete output number | 5 logic output (CN1) at 12…24 V DC |
| 1 pulse train output (PTO) (CN1) | |
| discrete output voltage | 12…24 V DC |
| discrete output logic | Positive or negative (CN1) |
| analogue input number | 2 |
| absolute accuracy error | 0.10% |
| analogue input type | V_REF voltage analog input: – 10…10 V, impedance: 10 kOhm, resolution: 14 bits |
| T_REF voltage analog input | |
| control signal type | Servo motor encoder feedback CN2 |
| protection type | Against reverse polarity: inputs signal |
| Against short-circuits: outputs signal | |
| Overcurrent: motor | |
| Overvoltage: motor | |
| Undervoltage: motor | |
| Overheating: motor | |
| Overload: motor | |
| Overspeed: motor | |
| safety function | STO (safe torque off), integrated |
| safety level | SIL 2 conforming to IEC 61800-5-2: 2007 |
| SIL 2 conforming to IEC 61508-1: 2010 | |
| PL d/category 3 conforming to EN/ISO 13849-1: 2008 | |
| SIL 2 conforming to EN/ISO 13849-1: 2009/AC | |
| SIL 2 conforming to EN 60204-1: 2006 | |
| SIL 2 conforming to EN 60204-1: 2009/A1 | |
| SIL 2 conforming to EN 60204-1: 2010/AC | |
| SIL 2 conforming to IEC 62061: 2012 | |
| communication interface | CANopen, integrated |
| CANmotion, integrated | |
| connector type | RJ45 (CN4) for CANopen, CANmotion |
| method of access | Slave |
| transmission rate | 250 kbit/s for bus length of 100…250 m for CANopen, CANmotion |
| 500 kbit/s for bus length of 4…100 m for CANopen, CANmotion | |
| 1 Mbit/s for bus length of 4 m for CANopen, CANmotion | |
| number of addresses | 1…127 for CANopen, CANmotion |
| physical interface | RS485 for Modbus Serial line slave |
| status LED | 1 LED (red) charge |
| 1 LED (green) RUN | |
| 1 LED (red) error | |
| signalling function | Servo status and fault codes five 7-segment display units |
| Marking | CE |
| CSA | |
| CULus | |
| type of cooling | Integrated fan |
| operating position | Vertical |
| product compatibility | Servo motor BCH2 (130 mm, 4 motor stacks) at 2000 W |
| Servo motor BCH2 (100 mm, 2 motor stacks) at 2000 W | |
| Servo motor BCH2 (180 mm, 1 motor stacks) at 2000 W | |
| width | 62 mm |
| Height | 170 mm |
| Depth | 184 mm |
| Net weight | 1.7 kg |
| output current 3s peak 2 | 36 A at 220 V |
| output current 3s peak 3 | 36 A at 220 V |
| Environment | |
| electromagnetic compatibility | Conducted emission – test level: level 3 category C3 conforming to EN/IEC 61800-3 |
| Standards | EN/IEC 61800-5-1 |
| product certifications | CULus |
| CSA | |
| CE | |
| IP degree of protection | IP20 |
| vibration resistance | 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3 |
| shock resistance | 10 gn, type I conforming to IEC 60721-3-3 |
| relative humidity | 5…95 % without condensation |
| Ambient air temperature for operation | 0…55 °C |
| Ambient air temperature for storage | -25…65 °C |
| operating altitude | <= 1000 m without derating |
| > 1000…2000 m 1 % per 100 m | |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.582 cm |
| Package 1 Width | 25.497 cm |
| Package 1 Length | 25.982 cm |
| Package 1 Weight | 1.87 kg |
| Weight | 1.7 kg |
|---|---|
| Dimensions | 18.4 × 6.2 × 17 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
