Sale!

Festo 178467 Clamping Unit, 16 mm Rod, 1000 N Static Hold

Original price was: USD 426.92.Current price is: USD 366.86.

Ready-to-install spring-applied clamping unit with pneumatic release, G1/8 release connection, 3 bar release pressure and 410 g product weight.

SKU Festo-178467 Category
Festo Clamping Components

Festo KPE-16 Clamping Unit

BrandFesto
Model IdentifierKPE-16
Official Part Number178467

Technical Overview

The Festo KPE-16 combines a clamping cartridge and housing in a ready-to-install unit for 16 mm round material. Its spring-applied tilting-wedge mechanism provides 1000 N rated static holding force in both axial directions, with compressed air releasing the clamp through a G1/8 connection. The exact datasheet specifies 3–10 bar operation and a 3 bar release pressure. Festo defines static holding use with suitable steel rods, h8 diameter tolerance and Rmax 4 µm surface roughness. The 410 g unit has an anodised aluminium housing, brass jaws, POM piston and no position detection, with −10 to 80 °C ambient limits.

Ready-to-install clamping unit for 16 mm rods with spring-applied holding, 1000 N static force, pneumatic release and G1/8 release connection.

Key Features

  • Ready-to-install combination of clamping cartridge and housing
  • For 16 mm round material with 1000 N static holding force
  • Spring-applied tilting-wedge clamping in both axial directions
  • Pneumatic release through G1/8 connection
  • 3–10 bar operation with 3 bar release pressure
  • Manufacturer use limits: static holding; not positioning or dynamic operation
  • Steel rod requirements: h8 diameter tolerance and Rmax 4 µm roughness
  • Anodised aluminium housing, brass jaws, POM piston and NBR/PU seals
  • No position detection; any mounting position
  • 410 g product weight, −10 to 80 °C ambient range and CRC 2 classification

Add a ready-to-install spring-applied holding unit for a suitable 16 mm rod, with 1000 N static capacity and G1/8 pneumatic release.

Technical Specification Matrix

ParameterValue
Mounting positionAny
Type of clamping with direction of actionAt both ends; Clamping via spring force, released via compressed air
DesignTilting wedge mechanism
VariantsPiston rod at one end
Position detectionNone
Safety functionHolding and stopping a movement
Operating pressure0.3 MPa...1 MPa; 3 bar...10 bar; 43.5 psi...145 psi
Release pressure0.3 MPa; 3 bar
Round material to be clamped16 mm
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-10 °C...80 °C
Static holding force1000 N
Physical Weight (kg)0.41
Release connection, clamping unitG1/8
Note on materialsRoHS compliant
Material sealsNBR; TPE-U(PU)
Material springSpring steel
Material housingAluminium; anodised
Material clamp jawsBrass
Material pistonPOM
Assembly formReady-to-install combination of KP clamping cartridge and housing
Manufacturer application limitsNot suitable for positioning or dynamic operation; additional measures required for safety-related use
Rod material requirementsSteel, hard chrome-plated; steel, hardened; or rolled steel with tensile strength >650 N/mm² and HB30 hardness >175
Rod diameter toleranceh8
Rod surface roughnessRmax = 4 µm
Dimensions L x W x H (cm)6.9 x 4.5 x 8.35

Industrial Applications

1. Stationary Fixture-Rod Holding

A fixture moves a suitable 16 mm steel rod to its working location and then needs to retain that stationary position. The unit applies spring force through a tilting-wedge mechanism, with 1000 N rated static holding in both axial directions. Pneumatic pressure releases the clamp through its G1/8 connection before the next adjustment movement.

Problem Solved

Spring-applied static clamping retains the stationary fixture rod against axial loads, while a separate pneumatic release command permits the next adjustment once the holding state is disengaged.

16 mm rod 1000 N static G1/8 release

2. Static Dwell under Changing Air Conditions

A machine needs to retain a stationary rod during an extended process dwell while pneumatic pressure may fluctuate or system leakage may occur. Festo documents spring-force holding over long periods under those conditions. The KPE-16 supplies a 1000 N static rating for suitable 16 mm material, with release pressure specified at 3 bar.

Problem Solved

The spring-applied mechanism supplies the static holding force independently of continuously applied pneumatic clamping pressure, supporting rod retention during a dwell with changing surrounding air conditions.

Spring-applied hold 1000 N static 3 bar release

3. Integration of a Complete Rod-Holding Module

A machine builder needs a complete static holding module rather than assembling a separate cartridge and custom housing. The KPE-16 combines those elements in a ready-to-install unit measuring 69 × 45 × 83.5 mm in length, width and height. Its G1/8 release connection and 410 g product weight provide defined pneumatic and mechanical interfaces for the selected assembly.

Problem Solved

The combined cartridge and housing provide a complete holding module, giving the machine builder documented installation dimensions and a release interface for integrating static rod retention.

Ready-to-install unit 69 × 45 × 83.5 mm 410 g
Select your currency