$ 123.51
| Signal type | Digital Input |
| Safety Integrity Level (SIL) | SIL 2 |
| Systematic capability (SC) | SC 3 |
| Connection | Power Rail or terminals 9+, 10- | |
| Rated voltage | Ur | 19 … 30 V DC |
| Ripple | ≤ 10 % | |
| Rated current | Ir | ≤ 37 mA |
| Power dissipation | ≤ 750 mW | |
| Power consumption | ≤ 750 mW |
| Connection side | field side |
| Connection | terminals 1+, 2- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 8 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 … 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms |
| Connection side | control side |
| Connection | output I: terminals 5, 6 ; output II: terminals 7, 8 |
| Output I | signal ; relay |
| Output II | signal or fault message ; relay |
| Contact loading | 250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 30 V DC/2 A resistive load |
| Minimum switch current | 2 mA / 24 V DC |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
| Mechanical life | 107 switching cycles |
| Switching frequency | ≤ 10 Hz |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements | LEDs |
| Control elements | DIP switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | ||||
|
||||
| Low voltage | ||||
|
||||
| Electromagnetic compatibility | NE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018 |
| Degree of protection | IEC 60529:1989+A1:1999+A2:2013 |
| Functional safety | IEC/EN 61508:2010 |
| Input | EN 60947-5-6:2000 |
| Ambient temperature | -40 … 70 °C (-40 … 158 °F) |
| Degree of protection | IP20 | ||||||
| Connection | screw terminals | ||||||
| Mass | approx. 100 g | ||||||
| Dimensions | 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2 | ||||||
|
|||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | ||||||
| EU-type examination certificate | BASEEFA 06 ATEX 0092 X | |||||||||||||||
|
||||||||||||||||
| Supply | ||||||||||||||||
|
||||||||||||||||
| Output | ||||||||||||||||
|
||||||||||||||||
| Fault indication output | ||||||||||||||||
|
||||||||||||||||
| Galvanic isolation | ||||||||||||||||
|
||||||||||||||||
| Directive conformity | ||||||||||||||||
|
||||||||||||||||
| UL approval | E106378 | ||||
|
|||||
| IECEx approval | |||||
|
|||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |