$ 301.25
High-performance standard type ionizer featuring a 340mm bar length. Includes tungsten high-speed de-ionizing cartridges and a 3m power cable for static removal.
The SMC IZS40-340-06B is a standard type bar ionizer designed for efficient static neutralization using the AC corona discharge method. With a 340mm bar length, it is engineered to support high-speed de-ionizing cartridges (tungsten) for rapid charge removal. The unit features a built-in auto-balance sensor to maintain ion balance within +/- 30V. This configuration includes a 3-meter power supply cable and Type B mounting brackets, making it ready for integration into industrial automation lines for glass, electronics, or molding applications.
| Technical Parameter | Specification |
|---|---|
| Series | IZS40 (Standard Type) |
| Bar Length | 340 mm |
| Ion Generation Method | Corona Discharge (AC) |
| Applied Voltage | +/- 7000 V |
| Ion Balance | Within +/- 30 V |
| Power Supply Voltage | 24 VDC +/- 10% |
| Current Consumption | 330 mA or less |
| Fluid Type | Air (Clean Dry Air) |
| Operating Pressure | 0.5 MPa or less |
| Air Connection | One-touch fitting (Metric 6 mm) |
| Cable Length | 3 m |
| Bracket Included | Yes (Type B) |
| Needle Material | Tungsten (High-Speed Cartridge) |
| Effective Range | 50 to 2000 mm |
| Ambient Temperature | 0 to 40 degrees C |
| Ambient Humidity | 35 to 80% RH (No condensation) |
| Body Material | ABS |
| Cartridge Material | PBT |
| Output Signal | NPN (Error Signal) |
| Weight | Approx. 591 g (incl. cable/brackets) |
Neutralizes high static charges generated during the lifting and transport of glass substrates from surface plates.
Prevents electrostatic discharge (ESD) damage and breakage of fragile glass materials during automated handling.
Eliminates static buildup on electric substrates and circuit boards during dicing and subsequent vacuum pickup.
Mitigates element disruption and latent damage to sensitive electronic components caused by triboelectric charging.
Removes static charge from molded plastic parts to facilitate clean release from dies.
Improves mold detachability and prevents the electrostatic adhesion of dust and foreign particles to the finished product.
