The MOXA ICF-1150I-S-SC is a high-performance Serial-to-Fiber Converter engineered to facilitate robust and secure serial communication across fiber optic media. This model is tailored to extend serial transmission distances significantly, up to 40 km, using single-mode fiber. It’s ideal for demanding industrial applications requiring reliable data transmission over optical fiber, ensuring high data integrity and noise immunity.

Key Features:

Extended Transmission Range: Capable of transmitting serial data up to 40 km on single-mode fiber, this converter extends the reach of serial communication networks significantly.
Advanced Surge Protection: Includes built-in optical isolation for the serial signals and 2 kV isolation protection for the power supply, safeguarding against voltage spikes and grounding issues.
Versatile Serial Compatibility: Supports both RS-232 and RS-422/485 serial interfaces, making it adaptable to various types of serial equipment and applications.
Redundant Power Inputs: Equipped with dual power inputs to ensure continuous operation and minimize downtime due to power failures.
Easy Installation and Configuration: Features a compact design and simple dip-switch configuration, facilitating hassle-free installation and setup.

Benefits:

Enhanced Data Integrity: Provides robust protection against electromagnetic interference and voltage surges, enhancing the reliability and accuracy of data transmission.
Operational Continuity: The redundant power supplies contribute to higher system reliability and operational uptime, crucial for industrial environments.
Scalable Solutions: With its dual interface support, the converter can seamlessly integrate into existing systems, providing flexibility and scalability in network design.
Reduced Maintenance Costs: Durable design and built-in protections reduce the need for frequent maintenance and replacements, lowering operational costs.

Applications:

Industrial Automation: Ideal for connecting serial devices in large industrial plants where long-distance communication is necessary.
Transportation Systems: Can be used in transportation management systems where data integrity and transmission over long distances are critical.
Utility Networks: Suitable for utility facilities that require reliable serial-to-fiber conversion to ensure continuous system operations.
Remote Monitoring Systems: Ensures reliable data transmission in remote monitoring and control systems, where extended distance coverage is essential.

The MOXA ICF-1150I-S-SC Serial-to-Fiber Converter is an exemplary solution for extending serial communications in challenging industrial environments, ensuring both reliability and high performance.

Specification

Serial Interface	No. of Ports	2
	Serial Standards	RS-232 RS-422 RS-485
	Baudrate	50 bps to 921.6 kbps (supports non-standard baudrates)
	Flow Control	ADDC (automatic data direction control) for RS-485
	Connector	5-pin terminal block Single-mode SC connector
	Isolation	2 kV (I models)
	Optical Fiber	Refer Table 2
	Pull High/Low Resistor for RS-485	150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm, 770 ohm, 500 ohm, 485 ohm
	RS-485 Data Direction Control	ADDC (automatic data direction control)
	Terminator for RS-485	N/A, 120 ohms, 120 kilo-ohms
Serial Signals	RS-232	TxD, RxD, GND
	RS-422	Tx+, Tx-, Rx+, Rx-, GND
	RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
	RS-485-2w	Data+, Data-, GND
Power Parameters	No. of Power Inputs	1
	Input Current	300 mA @ 12 to 48 VDC
	Input Voltage	12 to 48 VDC
	Overload Current Protection	Supported
	Power Connector	Terminal block
	Power Consumption	300 mA @ 12 to 48 VDC
Physical Characteristics	IP Rating	IP30
	Housing	Metal
	Dimensions	30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
	Weight	330 g (0.73 lb)
	Installation	DIN-rail mounting
Environmental Limits	Operating Temperature	0 to 60°C (32 to 140°F)
	Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
	Ambient Relative Humidity	5 to 95% (non-condensing)
Standards and Certifications	EMC	EN 55032/35
	EMI	CISPR 32, FCC Part 15B Class A
	EMS	IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF
	Environmental Testing	IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
	Safety	UL 61010-2-201
	Vibration	IEC 60068-2-6
	Hazardous Locations	UL/cUL Class I Division 2 Groups A/B/C/D ATEX Zone 2
MTBF	Time	792,085 hrs
MTBF	Standards	Telcordia (Bellcore), GB
Warranty	Warranty Period	5 years
Warranty	Details	See www.moxa.com/warranty

Optical Fiber

		Multi-Mode	Single-Mode
Fiber Cable Requirements		50/125 µm, 800 MHz	G.652
		62.5/125 µm, 500 MHz
Typical Distance		5 km	40km
Wavelength	Typical (nm)	850	1310
	TX Range (nm)	840 to 860	1290 to 1330
	RX Range (nm)	800 to 900	1100 to 1650
Optical Power	TX Range (dBm)	0 to -5	0 to -5
	RX Range (dBm)	0 to -20	0 to -25
	Link Budget (dB)	15	20
	Dispersion Penalty (dB)	1	1