Item	Specifications
Product Number	HL-C2CE
Part Number	HL-C2CE
Connectale sensor head	Number of connectable units: Max. 2 units.
Supply voltage	24 V DC plus or minus 10 % including ripple 0.5 V (P-P)
Current consumption	500 mA approx. at 2 sensor heads connected 350 mA approx. at 1 sensor head connected (100 mA approx. is additionally required when the mini console is connected)
Sampling rate	10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms
Analog output : Voltage	Voltage output scale: -5 to +5 V/F.S (initial value) Output range during normal status: -10.0 to +10.0 V Output at abnormal status: -10.8 V or +10.8 V Resolution: 2 mV, Linearity: plus or minus 0.05 % F.S. Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx. (Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value.
Analog output : Current	Current output scale: 4 to 20 mA/F.S (initial value) Output range during normal status: 2 to 24 mA Output at abnormal status: 1 mA or 25 mA Resolution: 3 micro A, Linearity plus or minus 0.05% F.S. Load impedance: 250 Ohm max., Response delay time: 10 micro s approx. (Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value.
Alarm output	NPN open-collector transistor – Maximum sink current: 100 mA – Applied voltage: 30 V DC or less[between alarm output and Common(-)] – Residual voltage: 1 V or less(at 100 mA sink current)
Alarm output : Output operation	Opened when the amount of light is insufficient
Alarm output : Short-circuit protection	Incorporated
Judgment output (HI, GO, LO)	NPN open-collector transistor – Maximum sink current: 100 mA – Applied voltage: 30 V DC or less[between judgment output to Common(-)] – Residual voltage: 1 V or less(at 100 mA sink current)
Judgment output (HI, GO, LO): Output operation	Opened at output operation
Judgment output (HI, GO, LO) : Short-circuit protection	Incorporated
Strobe output	NPN open-collector transistor – Maximum sink current: 100 mA – Applied voltage: 30 V DC or less[between strobe output to Common(-)] – Residual voltage: 1 V or less(at 100 mA sink current)
Strobe output : Output operation	Opened at data determination
Strobe output : Short-circuit protection	Incorporated
Remote interlock input	Laser emission is delayed when connected to Common (-). Laser emission stop at open Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
Laser control input	Laser emission is stopped when connected to Common (-). Laser is emitted immediately after opened. Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
Zero set input	Zero set is ON when connected with Common (-). Zero set turns to OFF after continuously connected to Common (-) for one second. Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less)
Timing input	ON at/during connection to Common (-)(depending on analysis mode) Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
Reset input	Reset is done when connected to Common (-). Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
Memory change input	Memory is specified when connected to Common (-). Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less)
Indicator : Power	Green LED (lights up at power on)
Indicator : Sensor head A Laser radiation	Green LED (lights up during or immediately before laser emission of sensor head A)
Indicator : Sensor head B Laser radiation	Green LED (lights up during or immediately before laser emission of sensor head B)
Indicator : Alarm 1	Red LED (lights up when OUT1 can not be measured due to insufficient amount of light)
Indicator : Alarm 2	Red LED (lights up when OUT2 can not be measured due to insufficient amount of light)
Environmental resistance : Ambient temperature	0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Environmental resistance : Ambient humidity	35 to 85 %RH
Environmental resistance : Vibration resistance	10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each
Environmental resistance : Shock resistance	196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each
Material	Case: Polycarbonate
Weight	450 g approx.
Accessory	USB cable (2 m 6.562 ft long): 1 pc. Short bracket: 1 pc.