GX-112MKA-P – Cylindrical proximity sensor – Panasonic Inductive Sensors
$ 34.50
SKU: GX-112MKA-P
Specification
project | content |
---|---|
Order product number | GX-112MKA-P |
Model | GX-112MKA-P |
Maximum working distance | 4mm±10% Note: The maximum working distance is the maximum distance at which the sensor can detect a standard detected object. |
Stable detection range | 0mm~3.2mm Note: The stable detection range is the detection distance at which the sensor can stabilize the standard detection object (even when using ambient temperature changes and/or supply voltage fluctuations). |
Standard detection objects | Iron 12mm×12mm×t1mm |
Directives to which the CE marking applies | EMC Directive |
Should be poor | Less than 20% of working distance (using standard detection objects) |
Repeatability | Less than 5% of the working distance |
Supply voltage | 12V~24V DC±10%, pulsating P-P 10% or less |
Consumes current | 15mA or less |
output | <pnp输出 _msttexthash=”56282733″ _msthash=”137″>PNP open collector transistor • Maximum Source Current: 100mA (GX-108□) 200mA (except GX-108□) • Applied voltage: 30V DC or less • Residual voltage: 2.0V or less</pnp输出> |
Maximum reaction frequency | 1kHz |
Working status indicator | Orange LED (on when output ON) |
Environmental Performance : Protective construction | IP67(IEC) |
Environmental performance : Use ambient temperature | Use temperature -25 °C ~ +70 °C, storage: -40 °C ~ +80 °C |
Environmental performance: Ambient humidity | 85%RH or less (when operating at +70°C) |
Environmental performance: withstand voltage | Connect an AC voltage of 1000V between all connected power terminals and the housing for 1 minute |
Environmental performance : insulation resistance | Between all power connection terminals and housing, above 500MΩ, based on a DC500V high-impedance meter |
Environmental performance : Vibration resistant | In the X, Y and Z directions, it can withstand the vibration of 10Hz~50Hz and double amplitude of 1.5mm for up to 2 hours |
Environmental performance : Impact resistant | In the X, Y and Z directions, it can withstand three shocks with an acceleration of 500m/s² (about 50G). |
Material | Shell: nickel-plated brass (stainless steel except GX-108 housing), front plug: PBT, rear plug: PC |
cable | 0-core rubber cable with a cross-sectional area of 2.108mm² (except for GX-0, which has a cross-sectional area of 1.3mm²) and a length of 2m |
Cable extension | The total length of cables with a cross-sectional area of 0.3 mm² or more can be extended up to 100 m |
weight | Approx. 95g Note: This weight includes the weight of two nuts. |
Weight | 0.095 kg |
---|
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details