G9SP – Omron Safety Controllers

USD $ 504.84 – USD $ 719.04

SKU: N/A

G9SP Series

Name Number of I/O Unit
version		 Model
Safety inputs Test outputs Safety outputs Standard outputs
Safety
Controller		 10 4 Solid-state outputs: 4 4 Ver.2.0 G9SP-N10S
10 6 Solid-state outputs: 16 – G9SP-N10D
20 6 Solid-state outputs: 8 – G9SP-N20S

 

G9SP Series

General Specifications

Power supply voltage 24 VDC (20.4 to 26.4 VDC -15% +10%)
Current consumption * G9SP-N10S: 400 mA (V1: 300 mA, V2: 100 mA)
G9SP-N10D: 500 mA (V1: 300 mA, V2: 200 mA)
G9SP-N20S: 500 mA (V1: 400 mA, V2: 100 mA)
Isolation class Class III (SELV)
Overvoltage category II
Noise immunity Conforms to IEC61131-2
Vibration resistance 5 to 8.4 Hz: 3.5 mm, 8.4 to 150 Hz: 9.8 m/s2
Shock resistance 147 m/s2: 11 ms
Mounting DIN track mounting (IEC60715 TH35-7.5/TH35-15) or M4 screws
Ambient operating temperature 0 to +55°C
Ambient operating humidity 10% to 90% (with no condensation)
Ambient storage temperature -20°C to +75°C
Atmosphere No corrosive gas
Operating altitude 2,000 m max.
Pollution degree Pollution degree 2
Degree of protection IP20 except terminal blocks
Terminal screws M3 self-rising screws

 

* Not including the current consumption of external devices.

 

Model G9SP-N10S G9SP-N10D G9SP-N20S
Safety inputs 10 10 20
Safety outputs 4 16 8
Test outputs 4 6 6
Standard outputs 4 – –
Weight 290 g max. 440 g max. 430 g max.

 

Safety Input Specifications

Input type Sinking inputs (PNP)
Input current 6 mA
ON voltage 11 VDC min. (between each input terminal and G1)
OFF voltage 5 VDC max. (between each input terminal and G1)
OFF current 1 mA max.

 

 

Test Output Specifications

Output type Sourcing outputs (PNP)
Rated Output Current G9SP-N10S G9SP-N10S
T0, T1: 60 mA max.
T2: 30 mA max. *1
T3: 300 mA max. *2
T0-2 total: 60 mA max.
G9SP-N10D T0, T1, T2: 60 mA max.
T3: 300 mA max. *2
T4, T5: 30 mA max. *1
Total of T0-2 and T4-5: 60 mA max.
G9SP-N20S T0, T1, T2: 100 mA max.
T3: 300 mA max. *2
T4, T5: 30 mA max. *1
Total of T0-2 and T4-5: 120 mA max.
ON residual voltage 1.8 V max. (between each output terminal and V1)
Leakage current 0.1 mA max.

 

*1. Connection to OMRON D40A/D40Z Non-contact Door Switch is possible.
*2. With the Muting Lamp Output (open circuit detection)

 

Safety Output Specifications

Output type Sourcing outputs (PNP)
Rated output current 0.8 A max./output
1.6 A max./4 outputs (G9SP-N10S/-N20S) *1
1.2 A max./4 outputs (G9SP-N10D) *2
ON residual voltage 1.2 V max. (between each output terminal and V2)
OFF residual voltage 2 V max.
Leakage current 0.1 mA max.

 

*1. Total current for So0 to So3 and So4 to So7
*2. Total current for So0 to So3, So4 to So7, So8 to So11 and So12 to So15
Note: When a safety output is set as a pulse output, make sure that the connected devices do not malfunction due to the
OFF pulse (pulse width: 640 μs).

 

Standard Output Specifications (G9SP-N10S)

Output type Sourcing outputs (PNP)
ON residual voltage 1.5 V max. (between each output terminal and V2)
Rated output current 100 mA max.

 

 

Configurator

System Requirements

The following system is required to operate the G9SP Configurator WS02-G9SP[][][]. Make sure your system provides the following conditions and has the necessary components.

Item Description
CD-ROM or DVDROM drive One or more
Supported operating systems Windows XP Service Pack 3 (32-bit edition)
Windows Vista Service Pack 2 (32-bit edition, 64-bit edition)
Windows 7 (32-bit edition, 64-bit edition)
Windows 8 (32-bit edition, 64-bit edition)
Windows 8.1 (32-bit edition, 64-bit edition)
Windows 10 (32-bit edition, 64-bit edition)
Note: Administrator rights are required for installation.
CPU Computer with a processor that is recommended by Microsoft Corporation.
RAM Memory capacity that is recommended by Microsoft Corporation
Required hard disk space 200 MB min.
Display High-luminance display of SVGA (800 × 600) min.
With 256 colors min.
Connection port to Controller USB port

 

 

Weight N/A
Model

, ,

Related products