| Regulatory compliance |
・EMC Directive ： EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note 3) |
| Certification |
UL certification |
| Sensing range |
150 mm 5.906 in |
500 mm 19.685 in |
1 m 3.281 ft |
| Min. sensing object |
ø0.5 mm ø0.020 in
opaque object
(Completely beam interrupted object)
(Note 4) |
ø1.0 mm ø0.039 in
opaque object
(Completely beam interrupted object)
(Note 4) |
ø2.0 mm ø0.079 in
opaque object
(Completely beam interrupted object)
(Note 4) |
| Hysteresis |
– |
Repeatability
(perpendicular to sensing axis) |
0.05 mm 0.002 in or less |
| Supply voltage |
12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current consumption |
Emitter: 10 mA or less, Receiver: 10 mA or less |
| Output |
<NPN output type>
NPN open-collector transistor
・Maximum sink current: 50 mA
・Applied voltage: 30 V DC or less (between output and 0 V)
・Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
<PNP output type>
PNP open-collector transistor
・Maximum source current: 50 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current) |
|
Utilization category |
DC-12 or DC-13 |
| Short-circuit protection |
Incorporated |
| Response time |
0.5 ms or less |
| Operation indicator |
Orange LED (lights up when the output is ON) |
| Incident beam indicator |
– |
| Stability indicator |
Green LED
(lights up under stable light received condition or stable dark condition) |
| Pollution degree |
3 (Industrial environment) |
| Protection |
IP67 (IEC) |
| Ambient temperature |
-25 to +55 ℃ -13 to +131 ℉
(No dew condensation or icing allowed),
Storage: -30 to +70 ℃ -22 to +158 ℉ |
| Ambient humidity |
35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance |
Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage withstandability |
1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance |
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance |
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each |
| Shock resistance |
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting element |
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) |
| Material |
Enclosure: Polyethylene terephthalate
Lens: Polyalylate |
| Cable |
0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable,
2 m 6.562 ft long |
| Cable extension |
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). (Note 5) |
| Weight |
Net weight (each emitter and receiver): 20 g approx.,
Gross weight: 50 g approx. |
| Accessories |
Mounting screws: 1 set |
