Omron produce industrial sensors range such as fiber sensors, photoelectric sensors, displacement sensors/ measurement sensors, proximity sensors, photomicro sensors and rotary encodes.
Features
• A shiny background can be used as long as the distance between the sensor and the background is 20 mm or more.
• Detects minute objects such as a 0.05-mm-dia. pure copper wire.
• Small dispersion in sensing distance.
• Light modulation effectively reduces external light interference.
• Wide operating voltage range: 5 to 24 VDC
Sensors
| Appearance | Sensing method | Sensing distance | Output type | Output configuration | Model |
|---|---|---|---|---|---|
| Horizontal type | Convergent reflective type |
2 to 5 mm (Infrared light) |
NPN output | Dark-ON | EE-SPY311 |
| Light-ON | EE-SPY411 | ||||
| Vertical type | Dark-ON | EE-SPY312 | |||
| Light-ON | EE-SPY412 |
Accessories (Order Separately)
| Type | Cable length | Model | |
|---|---|---|---|
| Connector | Connector | EE-1001 | |
| EE-1009 * | |||
| Connector with Cable | 1 m | EE-1006 1M | |
| EE-1010 1M * | |||
| 2 m | EE-1006 2M | ||
| EE-1010 2M * | |||
| Connector with Robot Cable | 1 m | EE-1010-R 1M * | |
| 2 m | EE-1010-R 2M * | ||
| NPN/PNP Conversion Connector | 0.46 m (total length) | EE-2002 | |
Note: Refer to Accessories for details.
* EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled.
Specifications
| Models | EE-SPY311, EE-SPY411, EE-SPY312, EE-SPY412 | |
|---|---|---|
| Sensing distance | 2 to 5 mm (Reflection factor: 90%; white paper 15 × 15 mm) | |
| Minimum sensing object | Pure copper wire (0.05 mm dia.) | |
| Distance to background *1 | 20 mm max. (glass with aluminum deposition) | |
| Differential distance | 0.2 mm (with a sensing distance of 3 mm, horizontally) | |
| Light source | GaAs infrared LED with a peak wavelength of 940 nm | |
| Indicator *2 | Light indicator (red) | |
| Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 5% max. | |
| Current consumption | Average: 15 mA max., Peak: 50 mA max. | |
| Control output | NPN voltage output: Load power supply voltage: 5 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. 10 mA load current with a residual voltage of 0.4 V max. |
|
| Response frequency *3 | 100 Hz min. | |
| Ambient illumination | 3,000 lx max. with incandescent light or sunlight on the surface of the receiver | |
| Ambient temperature range |
Operating: – 10 to +55 ° C Storage: – 25 to +65 ° C |
|
| Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% |
|
| Vibration resistance | Destruction: 10 to 50 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | |
| Shock resistance | Destruction: 500m/s2 for 3 times each in X, Y, and Z directions | |
| Degree of protection | IEC IP50 | |
| Connecting method | Special connector (soldering not possible) | |
| Weight | Approx. 2.6 g | |
| Material | Case | Polycarbonate |
| Holder | Polybutylene phthalate (PBT) | |
*1. The indicator is a GaP red LED (peak wavelength: 700 nm).
*2. The response frequency was measured by detecting the following rotating disk.
