Omron produce industrial sensors range such as fiber sensors, photoelectric sensors, displacement sensors/ measurement sensors, proximity sensors, photomicro sensors and rotary encodes.
Features
• Easy operation monitoring with bright light indicator.
• Wide operating voltage range: 5 to 24 VDC
• Light modulation effectively reduces external light interference.
• Easy-to-wire connector assures ease of maintenance.
Lineup
Sensors
| Sensing method | Sensing distance | Output type | Output configuration |
Model |
|---|---|---|---|---|
| Through-beam type |
1 m | NPN output | Dark-ON | EE-SPW311 |
| Light-ON | EE-SPW411 |
* Both an EE-1006L Connector with Cable for the Emitter and an EE-1006D Connector with Cable for the Receiver are included with the Photomicrosensor.
Refer to Accessories when using non-standard connectors, including Robot Cables and PNP Adapters.
Refer to Accessories when using non-standard connectors, including Robot Cables and PNP Adapters.
Specifications
| Models | EE-SPW311, EE-SPW411 | |
|---|---|---|
| Sensing distance | 1 m | |
| Sensing object | Opaque: 5 mm dia. min. | |
| Directional angle | 5 to 20 ° | |
| Light source | GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm | |
| Indicator *1 | Light indicator (red) | |
| Supply voltage | 5 ( -5%) to 24 (+10%) VDC, ripple (p-p): 5% max. | |
| Current consumption | Emitter: 20 mA max., Receiver: 20 mA max. | |
| Control output | NPN open collector: Load power supply voltage: 5 to 24 VDC Load current: 100 mA max. OFF current: 0.5 mA max. 100 mA load current with a residual voltage of 0.8 V max. 10 mA load current with a residual voltage of 0.4 V max. |
|
| Response frequency *2 | 100 Hz min. | |
| Ambient illumination | 3,000 lx max. with incandescent light on the surface of the receiver | |
| Ambient temperature range |
Operating: – 10 to +55 ° C Storage: – 25 to +65 ° C |
|
| Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% |
|
| Vibration resistance | Destruction: 200 to 2,000 Hz (peak acceleration: 100 m/s2) 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions |
|
| Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | |
| Degree of protection | IEC IP60 | |
| Connecting method | Special connector (soldering not possible) | |
| Weight (packaged) | Approx. 8.8 g | |
| Material | Case | Polybutylene phthalate (PBT) |
| Lens | Polycarbonate | |
| Accessories | EE-1006L/D Connectors with Cables, Instruction Manual | |
*1. The indicator is a GaP red LED (peak wavelength: 700 nm).
*2. The response frequency was measured by detecting the following rotating disk.
