EC-G – Pulse Air-gun Lonizer – Panasonic Ionizers Static Control Devices

USD $ 824.25

SKU: N/A

Specification

Item Specifications
Product Number EC-G02
Part Number EC-G02
CE marking compliant directives EMC Directive, RoHS Directive
Charge removal time 0.5 sec. or less approx. (±1,000 V → ±100 V)
(Note):Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa.
Applicable fluid Air (dried clean air)
(Note):Dried clean air is the air passing through air dryer (dew point -20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.)
Supplied air flow 300 ℓ/min. (ANR) or less
Air pressure range 0.05 to 0.50 MPa
Supply voltage Accessory AC adapter INPUT: 100 – 240 V AC ±10 % 50/60 Hz
(OUTPUT: 24 V DC)
Power consumption 30 VA or less
Discharge method High-frequency AC method
Pulse air mode Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch
LED illumination mode ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)
External input Ionized air emission operation ON / OFF using OR control with trigger switch
Ionized air emission operation ON: Short-circuited to COM (-)
Ionized air emission operation OFF: Open
Ambient temperature 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), AC adapter: 0 to +40 ℃ +32 to +104 ℉
Ambient humidity 35 to 65 % RH (No dew condensation allowed)
Weight 270 g approx. (main unit only)
Accessories AC adapter: 1pc.
Exclusive intermediate cable (oil-resistant, heat-resistant, bending-resistant type) length 2m 6.562 ft: 1 pc.
Straight joints
・Tube outer diameter ø8-ø8mm ø0.315-ø0.315 in compatible type: 1 pc. (Note):At the time of shipment from the factory, ø8-ø8mm ø0.315-ø0.315 in type is attached.
・Tube outer diameter ø8-ø6mm ø0.315-ø0.236 in compatible type: 1 pc.
Connector connection terminal (Manufactured by Molex): 3 pcs.
Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.