1. Guided Short-Stroke Part Transfer
An assembly station moves a small handling attachment between two nearby positions. The 80 mm pneumatic stroke supplies the travel while a ball bearing cage guide supports the slide movement, combining actuation and guidance in the same unit. The double-acting yoke drive provides movement in both directions, with a documented 0.8 m/s maximum speed rather than an assumed production cycle time.
Problem Solved
Integrated pneumatic drive and ball bearing cage guidance provide a guided transfer movement without assigning unsupported lateral-load capability to an unguided piston rod alone.
80 mm stroke
Ball bearing cage guide
Double-acting
2. Adjustable Tool Approach and Withdrawal
A fixture needs to set the working and withdrawn positions of a small tool attachment during machine setup. This slide provides a 111 mm front adjustment range and a 51.5 mm rear adjustment range within its documented arrangement. Its ±0.01 mm repetition accuracy characterizes repeated positioning, while proximity-switch detection offers a means of observing actuator position in the machine sequence.
Problem Solved
Adjustable end positions let the mechanism's travel endpoints be set mechanically, while the documented repetition accuracy and proximity-switch compatibility characterize repeat operation and position observation.
111 mm front adjustment
51.5 mm rear adjustment
±0.01 mm repetition
3. Supported Motion of an Offset Attachment
A compact pneumatic mechanism carries an attachment whose offset introduces moments into the moving slide. The DGSL provides a ball bearing cage guide with separately published moment limits of 130 Nm about Mx and 80 Nm about My and Mz. Its through-hole mounting connects the unit to the machine structure, giving the designer explicit guidance and mounting characteristics for evaluating the attachment arrangement.
Problem Solved
The integrated guide and published directional moment limits provide a defined mechanical basis for carrying an offset attachment through the stroke, rather than assuming unqualified moment capacity.
130 Nm Mx
80 Nm My/Mz
Through-hole mounting