DFS60B-S4PD10000 – Incremental encoders – SICK Encoders

$ 395.12

SKU: SICK 1056524

Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.

Part Number: 1056524
Encoders Model: DFS60B-S4PD10000
OEM Spec Ref 

Performance

Pulses per revolution 10,000 1)
Measure the step distance 90° electricity/number of pulses per turn
Measures pulse width deviation, not the number of “binary” pulses ± 0.01°
Error limit ± 0.05°
  • 1) See Maximum Speed Observation.

Interfaces

Communication interface Incremental
Communication interface details TTL / HTL
Factory settings Factory-programmed output level TTL
Number of signal channels 6 channels
Programmable/parameterized ✔
Initialization time 32 ms 1)

30 ms
Output frequency ≤ 600 kHz
Load current ≤ 30 mA
power consumption ≤ 0.7 W (no load)
  • 1) Mechanical zero pulse width.

Electrical data

Connection type Male connector, M12, 8-pin, axial
Supply voltage 4.5 … 32 V
Reference signal, quantity 1
Reference signal, location 90°, electrical, logically connected to A and B
Reverse polarity protection ✔
Short-circuit protection at the output ✔ 1) 2)
MTTFd: Dangerous Failure Interval 300 years (EN ISO 13849-1) 3)
  • 1) TTL programming, ≥ 5.5 V: short circuit with another channel or GND, maximum permissible time 30 s.
  • 2) HTL programming or TTL ≥ 5.5 V: short circuit with another channel, US or GND, maximum permissible time 30 s.
  • 3) This product is a standard product and not a safety component made in accordance with the Machinery Directive. Calculations are based on component load rating, average ambient temperature of 40°C, frequency of use of 8760 hours/year. All electronic faults are considered dangerous. For more information, see the documentation number 8015532.

Mechanical data

Mechanical specifications Solid shaft, clamping flange
Shaft diameter 10 mm
Linear bearings 19 mm
weight + 0.3 kg
Material, shaft stainless steel
Material, flange aluminium
Material, shell Die-cast aluminum
Starting torque 0.5 Ncm (+20 °C)
Operating torque 0.3 Ncm (+20 °C)
Shaft loads are allowed 80 N (radial)

40 N (axial)
Operating speed ≤ 9,000 min⁻¹ 1)
Inertia 6.2 gcm²
Bearing service life 3.6 x 10^10 rpm
angular acceleration ≤ 500,000 rad/s²
  • 1) When designing the operating temperature range, it is important to note that the self-heating is 3.3 K / 1,000 rpm.
Weight 0.315 kg

Related products