DBS50E-S5AK00360 Incremental Encoders – SICK Encoders
$ 106.95
SKU: SICK 1060686
Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.
Part Number: 1060686
Encoders Model: DBS50E-S5AK00360
OEM Spec Ref
Performance
Pulses per revolution | 360 |
Measuring step | 90°, electric/pulses per revolution |
Measuring step deviation | ± 18° / pulses per revolution |
Error limits | ± 54° / pulses per revolution |
Duty cycle | ≤ 0.5 ± 5 % |
Interfaces
Communication interface | Incremental |
Communication Interface detail | TTL / RS-422 |
Number of signal channels | 6-channel |
Initialization time | < 3 ms |
Output frequency | ≤ 300 kHz |
Load current | ≤ 30 mA |
Operating current | ≤ 50 mA (without load) |
Load current | ≤ 30 mA |
Power consumption | ≤ 0.7 W (without load) |
Electrical data
Connection type | Cable, 8-wire, universal, 1.5 m |
Supply voltage | 4.5 … 5.5 V |
Reference signal, number | 1 |
Reference signal, position | 90°, electric, logically gated with A and B |
Short-circuit protection of the outputs | ✔ 1) |
MTTFd: mean time to dangerous failure | 600 years (EN ISO 13849-1) 2) |
- 1) The short-circuit rating is only given if Us and GND are connected correctly.
- 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design | Solid shaft, face mount flange |
Shaft diameter | 8 mm |
Shaft length | 15.5 mm |
Weight | + 180 g (with connecting cable) |
Shaft material | Stainless steel |
Flange material | Aluminum |
Housing material | Aluminum |
Material, cable | PVC |
Start up torque | + 0.9 Ncm (+20 °C) |
Operating torque | 0.6 Ncm (+20 °C) |
Permissible shaft loading | 30 N (axial)
50 N (radial) |
Operating speed | 6,000 min⁻¹ 1) |
Maximum operating speed | 8,000 min⁻¹ 2) |
Moment of inertia of the rotor | 0.65 gcm² |
Bearing lifetime | 2 x 10^9 revolutions |
Angular acceleration | ≤ 500,000 rad/s² |
- 1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
- 2) No permanent operation. Decreasing signal quality.
Ambient data
EMC | According to EN 61000-6-2 and EN 61000-6-3 (class A) |
Enclosure rating | IP65 |
Permissible relative humidity | 90 % (Condensation not permitted) |
Operating temperature range | –20 °C … +85 °C, –35 °C … +95 °C on request |
Storage temperature range | –40 °C … +100 °C, without package |
Resistance to shocks | 100 g, 6 ms (EN 60068-2-27) |
Resistance to vibration | 20 g, 10 Hz … 2,000 Hz (EN 60068-2-6) |
Weight | 0.248 kg |
---|---|
Dimensions | 9.5 × 9.0 × 11.5 cm |