CS1W-CLK53 – SYSMAC CS-series Controller Link Units – Programmable Controllers – Omron
USD $ 2,085.30
SKU: CS1W-CLK53
Omron Automation Systems include Programmable Controllers that support machine control, and Network/Software products to support easy information exchange with host systems.
Lineup
Controller Link Units
| Unit clas- sifica- tion |
Product name |
Specifications | No. of unit numbers allocated |
Current consump- tion (A) |
Model | Stand- ards |
||||
|---|---|---|---|---|---|---|---|---|---|---|
| Commu- nications cable |
Commu- nications type |
Duplex support |
Max. Units mountable per CPU Unit |
5 V DC |
26 V DC |
|||||
| CS1 CPU Bus Unit |
Controller Link Unit  |
Wired shielded twisted- pair cable *1 |
Data links and message service |
No | 8 | 1 | 0.33 | – | CS1W-CLK23 | UC1, N, L, CE |
| Controller Link Unit  |
Optical ring H-PCF cable *2 |
Yes. Unit duplexing and cable loop back are supported. |
Non-duplex: 8, Duplex: 11 (6 Units comprising 3 sets of Duplex Units + 5 Non-duplex Units) |
1 | 0.52 | – | CS1W-CLK13 | |||
| Controller Link Unit  |
Optical ring GI cable *3 |
1 | 0.65 | – | CS1W-CLK53 | |||||
*1. Use the following special cable for shielded, twisted-pair cable.
• ESVC0.5×2C-13262 (Bando Electric Wire: Japanese Company)
• ESNC0.5×2C-99-087B (JMACS Japan Co., Ltd. : Japanese Company)
• ESPC 1P×0.5mm2 (Nagaoka Electric Wire Co.,Ltd.: Japanese Company)
• Li2Y-FCY2×0.56qmm (Kromberg & Schubert, Komtec Department: German Company)
• 1×2×AWG-20PE+Tr.CUSN+PVC (Draka Cables Industrial: Spanish Company)
• #9207 (Belden: US Company)
*2. When using a wire-to-optical (H-PCF) cable, use a H-PCF cable (for both Controller Link and SYSMAC LINK) or a H-PCF optical fiber cable with connector.
*3. When using a wire-to-optical (GI) cable, use a GI optical cable that matches the specifications.
• ESVC0.5×2C-13262 (Bando Electric Wire: Japanese Company)
• ESNC0.5×2C-99-087B (JMACS Japan Co., Ltd. : Japanese Company)
• ESPC 1P×0.5mm2 (Nagaoka Electric Wire Co.,Ltd.: Japanese Company)
• Li2Y-FCY2×0.56qmm (Kromberg & Schubert, Komtec Department: German Company)
• 1×2×AWG-20PE+Tr.CUSN+PVC (Draka Cables Industrial: Spanish Company)
• #9207 (Belden: US Company)
*2. When using a wire-to-optical (H-PCF) cable, use a H-PCF cable (for both Controller Link and SYSMAC LINK) or a H-PCF optical fiber cable with connector.
*3. When using a wire-to-optical (GI) cable, use a GI optical cable that matches the specifications.
Specifications
Communications Specifications
| Items | Specifications | ||
|---|---|---|---|
| Model | CS1W-CLK23 3G8F7-CLK23-E CS1W-CLK21-V1 *1 3G8F7-CLK21-EV1 *1 |
CS1W-CLK13 3G8F7-CLK13-E CS1W-CLK12-V1 *1 3G8F7-CLK12-EV1 *1 |
CS1W-CLK53 3G8F7-CLK53-E CS1W-CLK52-V1 *1 3G8F7-CLK52-EV1 *1 |
| Type | Wired (shielded twisted-pair cable) | Optical Ring (H-PCF cable) | Optical Ring (GI cable) |
| Communications method | N:N token-bus method | N:N token-ring method (token-ring mode) N:N token-bus method (token-bus mode) |
|
| Code | Manchester code | ||
| Modulation | Baseband code | ||
| Synchronization | Flag synchronization (conforms to HDLC frames) | ||
| Transmission path format | Multidrop method (bus type) | Ring method (token-ring mode) Daisy-chain method (token-ring mode) |
|
| Transmission speed | The following are the maximum transmission distances depending on the transmission speed. 2 Mbits/s: 500 m 1 Mbits/s: 800 m 500 kbits/s: 1 km |
2 Mbits/s | |
| Maximum transmission distance |
20 km | 30 km | |
| Maximum distance between nodes |
Not specified. (Maximum transmission distance must be satisfied for the entire system.) |
Crimp-cut: 800 m Adhesive polishing: 1 km *2 |
62.5/125 μm: 2 km 50/125 μm: 1 km |
| Medium | Specified shielded twist-pair cable Two signal wires, one shield |
H-PCF cable (two-core optical cable) |
GI cable (two-core optical cable: 62.5/125 μm, 50/ 125 μm) |
| Node connection method | PLC: Connection to terminal block Computer: Connection using special (supplied) connector |
Connection using special connector (full-lock connector or half-lock connector) |
Connection using ST connector |
| Maximum number of nodes | 32 or 62 nodes *3 *4 | 62 *5 | |
| Applicable Programming Devices |
CX-Integrator in CX-One, CX-Net in CX-Programmer *4, and Programming Console | ||
| Communications functions | Data links and message service | ||
| Number of data link words | Send words per node: 4,000 words max. (CS1W-CLK[]3), 1,000 words max. (All other Units) Number of send/receive words per node: 12,000 words max. (Pre-Ver. 1.2) 20,000 words max. (unit Ver. 1.2 or later) Total number of send words per network: 62,000 words max. |
||
| Data link areas | PLC: Bit areas (CIO Area, Work Area, Link Area *6), Data Memory (DM), Extended DM Area (EM) Computer: FinsGateway event memory |
||
| Message length | 2,012 bytes max. (including the header) | ||
| RAS functions | Polling node backup function Self-diagnosis function (hardware checking at startup) Echoback test and broadcast test (using the FINS command) Watchdog timer Error log function |
Polling node backup function Self-diagnosis function (hardware checking at startup) Echoback test and broadcast test (using the FINS command) Watchdog timer Error log function Node bypass function Transmission path duplication (for ring method in token-ring mode only) Disconnect detection and notification (token-ring mode only) Node connection configuration data reading (for ring method in token-ring mode only) Duplex operation of Communications Units *7 |
|
| Error control | Manchester code check CRC check (CCITT X16+X12+X5+1) |
||
*1. Discontinuation models in July 2012.
*2. The maximum distance between nodes depends on the processing method for connectors and cables.
*3. With wired models, the maximum number of nodes is 32 if Repeater Units are not used. A Repeater Unit is required when building a network with more than 32 nodes. If a Repeater Unit is used, be sure to use only the following Controller Link Units or Boards and set the Wired Network 62 Node Enable Bit in the DM Parameter Area software switches at all nodes.
CS1W-CLK23/CLK21-V1 *1
CJ1W-CLK23/CLK21-V1 *1
3G8F7-CLK23-E/CLK21-EV1 *1
*4. CX-Net in CX-Programmer version 3.1 or earlier can be used only in a system with a maximum of 32 nodes (node address 1 to 32). If a system is to be used with a maximum of 62 nodes (node addresses 1 to 62), use CX-Net in CX-Programmer version 3.2 or higher or the CX-Integrator.
*5. If duplex Controller Link Units are used, the effective maximum number of nodes will be 62 (i.e., the maximum number of nodes in standby mode (STB)).
*6. CS-series PLCs do not have a Link Area, but LR000 to LR199 are automatically converted CIO 1000 to CIO 1199.
*7. Only when a CS1W-CLK13/12-V1 *1/53/52-V1 *1 installed in a CS1D system is used in token ring mode.
*2. The maximum distance between nodes depends on the processing method for connectors and cables.
*3. With wired models, the maximum number of nodes is 32 if Repeater Units are not used. A Repeater Unit is required when building a network with more than 32 nodes. If a Repeater Unit is used, be sure to use only the following Controller Link Units or Boards and set the Wired Network 62 Node Enable Bit in the DM Parameter Area software switches at all nodes.
CS1W-CLK23/CLK21-V1 *1
CJ1W-CLK23/CLK21-V1 *1
3G8F7-CLK23-E/CLK21-EV1 *1
*4. CX-Net in CX-Programmer version 3.1 or earlier can be used only in a system with a maximum of 32 nodes (node address 1 to 32). If a system is to be used with a maximum of 62 nodes (node addresses 1 to 62), use CX-Net in CX-Programmer version 3.2 or higher or the CX-Integrator.
*5. If duplex Controller Link Units are used, the effective maximum number of nodes will be 62 (i.e., the maximum number of nodes in standby mode (STB)).
*6. CS-series PLCs do not have a Link Area, but LR000 to LR199 are automatically converted CIO 1000 to CIO 1199.
*7. Only when a CS1W-CLK13/12-V1 *1/53/52-V1 *1 installed in a CS1D system is used in token ring mode.
Individual Specifications
Controller Link Units
| Item | Specifications | |||
|---|---|---|---|---|
| Model | CS1W-CLK23 CS1W-CLK21-V1 * |
CS1W-CLK13 CS1W-CLK12-V1 * |
CS1W-CLK53 CS1W-CLK52-V1 * |
|
| Supported PLC | All CS-series CPU Units | |||
| Number of mountable Units | Unit version 1.2 or later: 8 Units max., Pre-Ver. 1.2: 4 Units max. | |||
| Installation site | Install onto a CPU Backplane or CS-series Expansion Backplane (classified as a CPU Bus Unit). | |||
| Storage location for network parameters and manually set data tables |
CPU Bus Unit Area (in the CPU Unit parameter area) | |||
| Storage location for routing tables | CPU Unit parameter area | |||
| Weight | 220 g | 300 g (excluding mounting bracket) |
300 g (excluding mounting bracket) |
|
| Current consumption |
5 V in PLC | 0.33 A | 0.52 A | 0.65 A |
| 26 V in PLC | – | – | – | |
| External 24 V | – | 0.20 A | 0.26 A | |
* Discontinuation models in July 2012.
Controller Link Support Boards (for PCI Bus)
| Item | Specifications | |||
|---|---|---|---|---|
| Models | 3G8F7-CLK23-E | 3G8F7-CLK13-E | 3G8F7-CLK53-E | |
| Applicable computers | IBM PC/AT or compatible CPU: Intel Celeron 400 MHz or better Main memory: 128 MB minimum One or more PCI bus slots (PCI bus revision 2.0 or higher, power supply: 5 V) Available hard disk space: 70 MB min. CD-ROM drive: One required for installation Display: VGA (640 × 480 (pixels) min.) (Other conditions conform to the OS.) |
|||
| Compatible OS | FinsGateway Version 2003 *1 Windows 10 (32bit) Windows 8 (32bit) Windows 7 (32bit) Professional Windows 7 (32bit) Home Premium Windows Vista Business Windows Vista Home Premium FinsGateway Version 3 *2 Windows XP Professional Windows XP Home Edition Windows 2000 Professional Windows NT 4.0 (Service Pack 3 or higher) Windows ME Windows 98SE |
|||
| Weight | 104 g | 120 g (excluding mounting bracket) |
124 g (excluding mounting bracket) |
|
| Current consumption |
5 V in PLC | 0.35 A | 0.54 A | 0.60 A |
| External 24 V | – | 0.35 A | 0.35 A | |
*1. Install the software from CD Ver. 3.12 or higher if the operating system is Windows 10 or 8 (32bit).
*2. Install FinsGateway version 3 if the operating system is Windows NT 4.0 (Service pack 3 or higher), Windows ME, or
Windows 98SE. In that case, however, the new functions of Controller Link Support Boards for the PCI Bus cannot
be used (i.e., automatic data link creation with 1:N allocation, changing data link tables with active data links, 62-
node setting for wired models, and maximum of 4000 send words).
*2. Install FinsGateway version 3 if the operating system is Windows NT 4.0 (Service pack 3 or higher), Windows ME, or
Windows 98SE. In that case, however, the new functions of Controller Link Support Boards for the PCI Bus cannot
be used (i.e., automatic data link creation with 1:N allocation, changing data link tables with active data links, 62-
node setting for wired models, and maximum of 4000 send words).
Repeater Units
| Item | Specifications | ||
|---|---|---|---|
| Model | CS1W-RPT01 | CS1W-RPT02 | CS1W-RPT03 |
| Supported Units and Boards | All wired Controller Link Units and Boards Note: If a maximum of 62 nodes is used, models that support 62 nodes must be used. |
||
| Transmission path | Wire-to-wire | Wire-to-optical (H-PCF) | Wire-to-optical (GI) |
| Transmission path format | Multi-drop Tree |
1:1 | 1:1 |
| Installation | Repeater Units are not mounted to the PLC. They are mounted separately with screws or on a DIN Track. |
||
| Weight | 130 g | 130 g (excluding mounting bracket) |
130 g (excluding mounting bracket) |
| Allowable power supply voltage range |
20.4 to 26.4 VDC (24 VDC – 15 V to +10%) | ||
| Current consumption | 0.06 A at 24 VDC | 0.06 A at 24 VDC | 0.07 A at 24 VDC |
| Inrush current | 2.5 A max. (24 VDC with rise time of 5 ms) | ||
Repeater Units are used to expand the Controller Link network for wired models. For Wired-to-optical Repeater Units, always use a set of two (1:1). Optical Ring Controller Link Units and Boards cannot be connected to the optical cable section between Repeater Units.
