$ 991.53
Manufacturer Part Number: Festo 4080492
Festo Remote I/O and Network Interface Components: CPX-E-16DI
The Festo CPX-E-16DI, with MPN 4080492, is a highly advanced Remote I/O and Network Interface component designed to streamline and enhance automation processes in various industrial environments. This unit is part of Festo’s CPX-E modular control system series, aimed at providing efficient, scalable solutions for electrical automation.
Key Features:
Benefits:
Applications:
The Festo CPX-E-16DI stands as a testament to Festo’s commitment to pushing the boundaries of industrial automation technology, offering a robust and efficient solution for managing complex automation tasks.
| Feature | Specification |
|---|---|
| Dimensions (W x L x H) | 18.9 mm x 76.6 mm x 124.3 mm |
| Width dimension | 18.9 mm |
| Type of mounting | With H-rail |
| Product weight | 102 g |
| Mounting position | Vertical Horizontal |
| Ambient temperature | -5 °C … 50 °C |
| Note on ambient temperature | -5 – 60 °C for vertical installation |
| Storage temperature | -20 °C … 70 °C |
| Relative air humidity | 95 % Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 |
| Max. cable length | 30 m inputs |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE marking | As per EU EMC directive As per EU RoHS directive |
| UKCA marking | To UK instructions for EMC To UK RoHS instructions |
| KC characters | KC EMC |
| Certification | RCM compliance mark c UL us – Listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Housing material | PA |
| Diagnostics via LED | Faults per module Status per channel |
| Diagnostics via bus | Sensor supply short circuit/overload |
| Max. address capacity inputs | 2 byte |
| Module parameters | Sensor supply short circuit diagnostics Input debounce time Signal extension time Response to short circuit/overload |
| Channel parameters | Signal extension |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 15 mA |
| Reverse polarity protection | 24 V sensor supply against 0 V sensor supply |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 8x terminal strip |
| Electrical input connection, connection technology | Spring-loaded terminal |
| Electrical connection, input, number of pins/wires | 6 |
| Electrical connection for input, connection pattern | 00995843 |
| Electrical connection for input, conductor cross section | 0.2 mm² … 1.5 mm² |
| Electrical connection for input, information on conductor cross section | 0.2 – 2.5 mm² for flexible conductors without cable end sleeves |
| No. of inputs | 16 |
| Input characteristics | As per IEC 61131-2, type 3 |
| Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
| Input switching logic | PNP (positive switching) 2-wire sensors as per IEC 61131-2 3-wire sensors as per IEC 61131-2 |
| Input debounce time | 0.1 ms 3 ms 10 ms 20 ms |
| Max. residual current of inputs per module | 1.8 A |
| Electrical isolation between channels | no |
| Electrical isolation between channel and internal bus | no |
| Fuse protection (short circuit) | Internal electronic fuse per module |
