Menu
Menu
$ 226.16
This Altivar 320 variable speed drive can feed single-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 200V to 240V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.
| Main | |
| Part Number | ATV320U15M2B |
| Range of product | Altivar Machine ATV320 |
| Product or component type | Variable speed drive |
| Product specific application | Complex machines |
| Variant | Standard version |
| Format of the drive | Book |
| Mounting mode | Cabinet mount |
| Communication port protocol | Modbus serial |
| CANopen | |
| option card | Communication module, CANopen |
| Communication module, EtherCAT | |
| Communication module, Profibus DP V1 | |
| Communication module, PROFINET | |
| Communication module, Ethernet Powerlink | |
| Communication module, EtherNet/IP | |
| Communication module, DeviceNet | |
| [Us] rated supply voltage | 200…240 V – 15…10 % |
| Nominal output current | 8.0 A |
| motor power kW | 1.5 kW for heavy duty |
| EMC filter | Class C2 EMC filter integrated |
| IP degree of protection | IP20 |
| Complementary | |
| Discrete input number | 7 |
| discrete input type | STO safe torque off, 24 V DC, impedance: 1.5 kOhm |
| DI1…DI6 logic inputs, 24 V DC (30 V) | |
| DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V) | |
| Discrete input logic | Positive logic (source) |
| Negative logic (sink) | |
| Discrete output number | 3 |
| discrete output type | Open collector DQ+ 0…1 kHz 30 V DC 100 mA |
| Open collector DQ- 0…1 kHz 30 V DC 100 mA | |
| Analogue input number | 3 |
| analogue input type | AI1 voltage: 0…10 V DC, impedance: 30 kOhm, resolution 10 bits |
| AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits | |
| AI3 current: 0…20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits | |
| Analogue output number | 1 |
| analogue output type | Software-configurable current AQ1: 0…20 mA impedance 800 Ohm, resolution 10 bits |
| Software-configurable voltage AQ1: 0…10 V DC impedance 470 Ohm, resolution 10 bits | |
| relay output type | Configurable relay logic R1A 1 NO electrical durability 100000 cycles |
| Configurable relay logic R1B 1 NC electrical durability 100000 cycles | |
| Configurable relay logic R1C | |
| Configurable relay logic R2A 1 NO electrical durability 100000 cycles | |
| Configurable relay logic R2C | |
| maximum switching current | Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC |
| Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC | |
| Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC | |
| Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC | |
| Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC | |
| Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC | |
| minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC |
| method of access | Slave CANopen |
| 4 quadrant operation possible | TRUE |
| Asynchronous motor control profile | Voltage/frequency ratio, 5 points |
| Flux vector control without sensor, standard | |
| Voltage/frequency ratio – Energy Saving, quadratic U/f | |
| Flux vector control without sensor – Energy Saving | |
| Voltage/frequency ratio, 2 points | |
| Synchronous motor control profile | Vector control without sensor |
| Maximum output frequency | 0.599 kHz |
| transient overtorque | 170…200 % of nominal motor torque |
| Acceleration and deceleration ramps | Linear |
| U | |
| S | |
| CUS | |
| Ramp switching | |
| Acceleration/deceleration ramp adaptation | |
| Acceleration/deceleration automatic stop with DC injection | |
| Motor slip compensation | Automatic whatever the load |
| Adjustable 0…300 % | |
| Not available in voltage/frequency ratio (2 or 5 points) | |
| switching frequency | 2…16 kHz adjustable |
| 4…16 kHz with derating factor | |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | TRUE |
| line current | 17.6 A at 200 V (heavy duty) |
| 14.8 A at 240 V (heavy duty) | |
| Maximum input current | 17.6 A |
| Maximum output voltage | 240 V |
| apparent power | 3.6 kVA at 240 V (heavy duty) |
| Network frequency | 50…60 Hz |
| Relative symmetric network frequency tolerance | 5% |
| Prospective line Isc | 1 kA |
| Base load current at high overload | 3.7 A |
| power dissipation in W | Fan: 77.0 W at 200 V, switching frequency 4 kHz |
| With safety function Safely Limited Speed (SLS) | TRUE |
| With safety function Safe brake management (SBC/SBT) | FALSE |
| With safety function Safe Operating Stop (SOS) | FALSE |
| With safety function Safe Position (SP) | FALSE |
| With safety function Safe programmable logic | FALSE |
| With safety function Safe Speed Monitor (SSM) | FALSE |
| With safety function Safe Stop 1 (SS1) | TRUE |
| With sft fct Safe Stop 2 (SS2) | FALSE |
| With safety function Safe torque off (STO) | TRUE |
| With safety function Safely Limited Position (SLP) | FALSE |
| With safety function Safe Direction (SDI) | FALSE |
| protection type | Input phase breaks: drive |
| Overcurrent between output phases and earth: drive | |
| Overheating protection: drive | |
| Short-circuit between motor phases: drive | |
| Thermal protection: drive | |
| Width | 60 mm |
| Height | 325.0 mm |
| Depth | 245.0 mm |
| Net weight | 2.9 kg |
| Environment | |
| Operating position | Vertical +/- 10 degree |
| Product certifications | CE |
| ATEX | |
| NOM | |
| GOST | |
| EAC | |
| RCM | |
| KC | |
| Marking | CE |
| ATEX | |
| UL | |
| CSA | |
| EAC | |
| RCM | |
| standards | EN/IEC 61800-5-1 |
| electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 |
| Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 | |
| Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 | |
| 1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 | |
| Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 | |
| Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 | |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3 |
| Class 3S2 according to IEC 60721-3-3 | |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13…200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2…13 Hz |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Volume of cooling air | 11.3 m3/h |
| Overvoltage category | III |
| Regulation loop | Adjustable PID regulator |
| speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Pollution degree | 2 |
| Ambient air transport temperature | -25…70 °C |
| ambient air temperature for operation | -10…50 °C without derating |
| 50…60 °C with derating factor | |
| Ambient air temperature for storage | -25…70 °C |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.600 cm |
| Package 1 Width | 27.500 cm |
| Package 1 Length | 32.500 cm |
| Package 1 Weight | 2.658 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 20 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 69.200 kg |
| Weight | 2.9 kg |
|---|---|
| Dimensions | 24.5 × 6 × 32.5 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
