Menu
Menu
$ 395.34
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW or 10hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
| Main | |
| Part Number | ATS01N232QN |
| Range of product | Altistart 01 |
| Product or component type | Soft starter |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380…415 V – 10…10 % |
| motor power kW | 15 kW, 3 phases at 380…415 V |
| IcL starter rating | 32 A |
| utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| current consumption | 160 A at nominal load |
| Type of start | Start with voltage ramp |
| power dissipation in W | 4.5 W at full load and at end of starting |
| 324.5 W in transient state | |
| Complementary | |
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 342…456 V |
| supply frequency | 50…60 Hz – 5…5 % |
| Network frequency | 47.5…63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] control circuit voltage | Built into the starter |
| starting time | Adjustable from 1 to 10 s |
| 1 s / 50 | |
| 10 s / 5 | |
| 5 s / 10 | |
| Deceleration time symb | Adjustable from 1 to 10 s |
| Starting torque | 30…80 % of starting torque of motor connected directly on the line supply |
| discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| Discrete input voltage | 24…40 V |
| discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| discrete output current | 2 A DC-13 |
| 3 A AC-15 | |
| discrete output type | Open collector logic LO1 end of starting signal |
| Relay outputs R1A, R1C NO | |
| discrete output voltage | 24 V (voltage limits: 6…30 V) open collector logic |
| minimum switching current | 10 mA at 6 V DC for relay outputs |
| maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load |
| Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load | |
| display type | 1 LED (green) for starter powered up |
| 1 LED (yellow) for nominal voltage reached | |
| Tightening torque | 0.5 N.m |
| 1.9…2.5 N.m | |
| electrical connection | 4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit |
| Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit | |
| 4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit | |
| Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit | |
| Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit | |
| 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit | |
| Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit | |
| 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit | |
| 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit | |
| Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit | |
| 4 mm screw clamp terminal – flexible with cable end 1 1…6 mm² AWG 10 power circuit | |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 154 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Net weight | 0.56 kg |
| Compatibility code | ATS01N2 |
| Motor power range AC-3 | 15…25 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
| Environment | |
| electromagnetic compatibility | Conducted and radiated emissions level B conforming to CISPR 11 |
| Conducted and radiated emissions level B conforming to IEC 60947-4-2 | |
| Damped oscillating waves level 3 conforming to IEC 61000-4-12 | |
| Electrostatic discharge level 3 conforming to IEC 61000-4-2 | |
| EMC immunity conforming to EN 50082-1 | |
| EMC immunity conforming to EN 50082-2 | |
| Harmonics conforming to IEC 1000-3-2 | |
| Harmonics conforming to IEC 1000-3-4 | |
| Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 | |
| Immunity to electrical transients level 4 conforming to IEC 61000-4-4 | |
| Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 | |
| Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 | |
| Voltage/current impulse level 3 conforming to IEC 61000-4-5 | |
| Standards | EN/IEC 60947-4-2 |
| Product certifications | C-Tick |
| CSA | |
| CCC | |
| GOST | |
| UL | |
| B44.1-96/ASME A17.5 for starter wired to the motor delta terminal | |
| IP degree of protection | IP20 |
| pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 |
| 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 | |
| shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| ambient air temperature for operation | -10…40 °C (without derating) |
| 40…50 °C (with current derating of 2 % per °C) | |
| ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
| operating altitude | <= 1000 m without derating |
| > 1000 m with current derating of 2.2 % per additional 100 m | |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 15.500 cm |
| Package 1 Width | 17.500 cm |
| Package 1 Length | 5.500 cm |
| Package 1 Weight | 678.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 14 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 10.058 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 112 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 90.140 kg |
| Contractual warranty | |
| Warranty | 18 months |
| Weight | 0.56 kg |
|---|---|
| Dimensions | 13.1 × 4.5 × 15.4 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
