The Configuration.GigE class provides classes for configuring the IP addresses of GigE uEye cameras or uploading the camera firmware.
The order below is valid for configuring the IP settings of GigE uEye cameras and the associated GigE network adapters.
1.If a persistent IP address is configured for a GigE camera, it will be used (if free).
2.If no persistent IP address is configured for a GigE camera, the IP address is obtained via DHCP (if DHCP is enabled and a DHCP server is available).
3.If no persistent IP address is configured for a GigE camera and DHCP is not possible, an IP address is obtained from the IP address range for automatic IP configuration.
The following classes exist:
