IDS peak 2.15.0 / uEye+ firmware 3.54

Controls if the color correction is active. If color correction is active, the ColorCorrectionMatrix is used to enhance color rendering.

Values description

•Off: Disables color correction.

•Auto: Enables color correction automatically, if the selected PixelFormat is a debayered color format. This feature is only supported by uEye+ cameras (GV and U3 models).

Code example

C++

// ColorCorrectionMode refers to the entry selected by ColorCorrectionMatrix
// Set ColorCorrectionMatrix to "HQ"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("ColorCorrectionMatrix")->SetCurrentEntry("HQ");
// Determine the current entry of ColorCorrectionMode
std::string value = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("ColorCorrectionMode")->CurrentEntry()->SymbolicValue();
// Get a list of all available entries of ColorCorrectionMode
auto allEntries = nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("ColorCorrectionMode")->Entries();
std::vector<std::shared_ptr<peak::core::nodes::EnumerationEntryNode>> availableEntries;
for(const auto & entry : allEntries)
{
  if ((entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotAvailable)
          && (entry->AccessStatus()!=peak::core::nodes::NodeAccessStatus::NotImplemented))
  {
      availableEntries.emplace_back(entry);
  }
}
// Set ColorCorrectionMode to "Auto"
nodeMapRemoteDevice->FindNode<peak::core::nodes::EnumerationNode>("ColorCorrectionMode")->SetCurrentEntry("Auto");

C#

// ColorCorrectionMode refers to the entry selected by ColorCorrectionMatrix
// Set ColorCorrectionMatrix to "HQ"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("ColorCorrectionMatrix").SetCurrentEntry("HQ");
// Determine the current entry of ColorCorrectionMode
string value = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("ColorCorrectionMode").CurrentEntry().SymbolicValue();
// Get a list of all available entries of ColorCorrectionMode
allEntries = nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("ColorCorrectionMode").Entries();
List<string> availableEntries = new List<string>();
for(int i = 0; i < allEntries.Count(); ++i)
{
  if ((allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotAvailable)
          && (allEntries[i].AccessStatus() != peak.core.nodes.NodeAccessStatus.NotImplemented))
  {
      availableEntries.Add(allEntries[i].SymbolicValue());
  }
}
// Set ColorCorrectionMode to "Auto"
nodeMapRemoteDevice.FindNode<peak.core.nodes.EnumerationNode>("ColorCorrectionMode").SetCurrentEntry("Auto");

Python

# ColorCorrectionMode refers to the entry selected by ColorCorrectionMatrix
# Set ColorCorrectionMatrix to "HQ" (str)
nodeMapRemoteDevice.FindNode("ColorCorrectionMatrix").SetCurrentEntry("HQ")
# Determine the current entry of ColorCorrectionMode (str)
value = nodeMapRemoteDevice.FindNode("ColorCorrectionMode").CurrentEntry().SymbolicValue()
# Get a list of all available entries of ColorCorrectionMode
allEntries = nodeMapRemoteDevice.FindNode("ColorCorrectionMode").Entries()
availableEntries = []
for entry in allEntries:
  if (entry.AccessStatus() != ids_peak.NodeAccessStatus_NotAvailable
          and entry.AccessStatus() != ids_peak.NodeAccessStatus_NotImplemented):
      availableEntries.append(entry.SymbolicValue())
 
# Set ColorCorrectionMode to "Auto" (str)
nodeMapRemoteDevice.FindNode("ColorCorrectionMode").SetCurrentEntry("Auto")