USD 104.21
Push-in DIN-rail through terminal block, 0.25–4 mm² conductors, 800 V, 24 A, 5.2 mm width, Ex-rated, 2 jumper slots.
Rail-mounted through terminal block from Wago’s 2202 series with Push-in CAGE CLAMP connection technology and push-button actuation. Designed for DIN-35 rail mounting, this gray 4-conductor through terminal block supports front-entry wiring, conductor cross-sections from 0.25 to 4 mm², and a nominal cross-section of 2.5 mm². The datasheet specifies side/center marking, integrated test port capability, 2 jumper slots, 4 clamping units, and Ex-approved use cases. Rated electrical data includes 800 V nominal voltage, 24 A rated current, and 8 kV rated impulse withstand voltage under IEC/EN 60947-7-1, with hazardous-area ratings also listed. Physical dimensions are 5.2 mm width, 69.9 mm height, and 39.5 mm depth; weight is 7.7 g.
| Parameter | Value |
|---|---|
| Series | 2202 Series |
| Item number | 2202-1401 |
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type | Push-button |
| Wiring direction | Front-entry wiring |
| Clamping units | 4 |
| Total number of potentials | 1 |
| Number of levels | 1 |
| Number of jumper slots | 2 |
| Nominal cross-section | 2.5 mm² |
| Conductor material | Copper |
| Solid conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Solid conductor; push-in termination | 0.75 … 4 mm² / 18 … 12 AWG |
| Stranded conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Fine-stranded conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Fine-stranded conductor; with insulated ferrule | 0.25 … 2.5 mm² / 22 … 14 AWG |
| Fine-stranded conductor; with ferrule; push-in termination | 1 … 2.5 mm² / 18 … 14 AWG |
| Strip length | 10 … 12 mm / 0.39 … 0.47 inches |
| Nominal voltage | 800 V |
| Rated impulse withstand voltage | 8 kV |
| Rated current | 24 A |
| Current at conductor cross-section (max.) | 32 A |
| Rated voltage (UL/CSA use group B/C) | 600 V |
| Rated current (UL/CSA use group B/C) | 20 A |
| Rated voltage EN (Ex e II) | 550 V |
| Rated current (Ex e II) | 22 A |
| Rated current (Ex e II) with jumper | 20 A |
| Power loss, per pole (potential) | 0.7661 W |
| Resistance value for specified current-dependent power loss | 0.00133 Ω |
| Width | 5.2 mm / 0.205 inches |
| Height | 69.9 mm / 2.752 inches |
| Depth from upper-edge of DIN-rail | 32.9 mm / 1.295 inches |
| Depth | 39.5 mm / 1.555 inches |
| Mounting type | DIN-35 rail |
| Marking level | Center/side marking |
| Color | gray |
| Material group | I |
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.141 MJ |
| Actuator color | orange |
| Weight | 7.7 g |
| Processing temperature | -35 … +85 °C |
| Continuous operating temperature | -60 … +105 °C |
| GTIN | 4055143713870 |
| Country of origin | DE |
| Packaging type | Box |
| PU (SPU) | 100 pcs |
| UNSPSC | 39121410 |
| ETIM 10.0 | EC000897 |
| RoHS Compliance Status | Compliant, No Exemption |
Used as a compact through terminal block for multi-conductor field wiring on DIN-rail control panels with tool-free push-in termination and test access.
Reduces wiring time while maintaining secure, vibration-resistant connections and easy circuit testing.
Suitable for distributing a single potential across compact terminal strips where side/center marking and jumper slots simplify structured wiring.
Simplifies potential distribution and labeling in dense panels without sacrificing conductor compatibility.
Applicable where Ex-rated terminal components are required, with documented ATEX/IECEx approvals and Ex e electrical ratings.
Provides a certified wiring interface for intrinsically demanding environments that require Ex compliance and controlled thermal performance.
