1. Industrial Control Signal Isolation
In industrial control systems, low-voltage control signals (e.g., from a PLC) often need to activate higher-voltage or higher-current loads, or provide galvanic isolation between control and power circuits. The WAGO 788-306, with its 60 VDC nominal input, allows a control signal to safely switch loads up to 250 VAC / 16 A, protecting sensitive control electronics from load-side disturbances and providing necessary isolation.
Problem SolvedPrevents damage to delicate control electronics by isolating them from power circuits and amplifying control signals to drive higher-power loads.
Galvanic isolationPLC interfacesignal amplificationcontrol circuitsinductive loads
2. Actuator Control in Manufacturing Lines
The relay module can be used to control small motors, solenoids, or indicator lights in manufacturing and assembly lines. Its 16 A continuous current rating and 24 VDC / 250 VAC switching capabilities make it suitable for switching various industrial actuators. The DIN-rail mounting and Push-in CAGE CLAMP connections enable rapid installation and maintenance in control cabinets.
Problem SolvedProvides reliable on/off switching for industrial actuators, ensuring efficient operation and easy maintenance due to its plug-in design.
Solenoid valve controlsmall motor switchingindicator light controlmanufacturing processesDIN-rail mounting
3. HVAC and Lighting Control in Building Automation
In Building Management Systems, the WAGO 788-306 can interface between building controllers (often 24 VDC or 60 VDC outputs) and various HVAC components (fans, dampers, pumps) or lighting circuits. Its capability to switch up to 250 VAC at 16 A allows it to handle typical building electrical loads, while the compact design is beneficial for installation in crowded electrical panels.
Problem SolvedEnables robust and isolated control of building infrastructure like HVAC units and lighting from a central BMS, ensuring energy efficiency and occupant comfort.
Building automationHVAC controllighting circuitsenergy managementbuilding controllers
