USD 69.48
Shielded 2-meter PLC I/O interface cable with 40-pin Fujitsu and MIL connectors. Designed for 32 and 64-point modules, featuring 28 AWG cores and robust EMI protection for industrial automation.
The Omron XW2Z-200B is a 2.0-meter shielded connecting cable designed to interface PLC I/O units with connector-terminal block conversion units. It features a 40-pin Fujitsu connector on one end and a 40-pin MIL connector on the other, utilizing straight wiring. Designed for robust industrial environments, this pre-assembled mating cordset provides secure, high-density I/O wiring solutions for 32 and 64 point configurations, effectively reducing manual wiring time and minimizing connection errors in control panels.
| Parameter | Value |
|---|---|
| CableLength | 2.0m[1.2] |
| Connector 1 | 40-Pin Fujitsu (FCN) |
| Connector 2 | 40-Pin MIL |
| Wiring Configuration | Straight Wiring (Normal) |
| Rated Voltage | 125 VAC / 30 VDC |
| Rated Current | 1 A |
| Contact Resistance | 20 mΩ max. (at 20 mV, 100 mA) |
| Insulation Resistance | 100 MΩ min. (at 500 VDC) |
| Dielectric Strength | 500 VAC for 1 min (1 mA max leakage) |
| Conductor Size | 28 AWG (40 Cores) |
| Sheath Outer Diameter | 10.4 mm |
| Minimum Bending Radius | 84 mm (R84) |
| Operating Temperature | -20°C to +75°C |
| Shielding | Yes |
Manual point-to-point wiring of high-density PLC modules is error-prone and labor-intensive [1.2].
Deploying the pre-assembled XW2Z-200B allows one-touch connectivity between 64-point I/O modules and terminal blocks, drastically reducing integration time and eliminating cross-wiring risks.
Low-voltage 24VDC PLC signals routed near high-power variable frequency drives are susceptible to electromagnetic interference.
The fully shielded 28AWG construction and 500 VAC dielectric strength provide exceptional noise immunity, maintaining stable sensor data transmission.
Routing thick, 40-core wire bundles inside tight PLC enclosures often stresses connectors and compromises wire integrity.
The XW2Z-200B's engineered 10.4 mm outer diameter and precise 84 mm bending radius allow tight, structured routing through standard cable ducts without exceeding physical stress limits.
