1. Precision Ejection Station in Semiconductor Manufacturing
Utilizing the Festo ADN-S-12-15-A-P-A to push defective microchips off an automated conveyor. Its 15mm stroke is ideal for short-distance actuations in highly confined machinery spaces.
Problem SolvedSemiconductor inspection machines have extremely limited spatial envelopes. The ultra-compact footprint and low 33g base weight of the cylinder allow easy integration, while the proximity switch position detection ensures precise monitoring of the ejection process to prevent jams.
15 mm strokePosition detection via proximity switch33 g basic weightDouble-acting
2. Medical Syringe Assembly in Cleanroom Environments
Integrating the cylinder into an automated medical device assembly line to precisely press rubber stoppers into syringe barrels. The 68 N advance force at 6 bar provides controlled seating without damaging the components.
Problem SolvedMedical manufacturing requires strict particulate control and clean operation. The cylinder's ISO 14644-1 Class 5 cleanroom suitability ensures compliance, while its elastic cushioning at both ends minimizes mechanical shock and wear-induced contamination during the double-acting cycles.
Class 5 according to ISO 14644-168 N advance stroke forceElastic cushioning rings/plates0.1 MPa ... 1 MPa operating pressure
3. Lightweight Actuation for End-of-Arm Tooling on Delta Robots
Mounting the ADN-S cylinder on the end-effector of a high-speed packaging robot to actuate small mechanical grippers. The M5 pneumatic connection provides rapid air delivery for fast cycle times.
Problem SolvedHeavy end-of-arm tooling drastically reduces the speed and accuracy of high-speed pick-and-place robots. The exceptionally low moving mass of 6g and the basic weight of 33g minimize inertia, allowing the robot to maintain peak acceleration and deceleration while reliably actuating tools.
6 g moving massM5 pneumatic connectionHigh-alloy stainless steel piston rodMounting position optional
