1. High-Flow Pneumatic Tool Supply in Heavy Manufacturing
Utilized as the primary filter-regulator for centralized air distribution feeding multiple high-demand pneumatic tools on a heavy machinery assembly line. The unit handles up to 10000 l/min flow rates via its G1 pneumatic connection, while the 40 µm filter removes large particulates and bulk moisture.
Problem SolvedPrevents severe pressure drops when multiple high-consumption pneumatic tools are triggered simultaneously, and protects pneumatic motors from premature wear caused by pipe scale.
10000 l/min flow rateG1 connection40 µm filtrationDie-cast zinc housing16 bar max pressure
2. Inert Gas Pressure Regulation for Robotic Welding Cells
Deployed to regulate and filter inert shielding gases supplied to a multi-arm robotic welding station. Operating within a 0.5 to 12 bar regulation range, it ensures steady shielding gas flow, while the metal bowl guard and moderate corrosion resistance withstand the harshness of the welding environment.
Problem SolvedEliminates porosity defects in weld joints by providing a highly stable, high-volume flow of clean inert gas without pressure fluctuations during simultaneous robotic weld cycles.
Inert gases compatibility0.5 bar ... 12 bar regulation rangeMetal bowl guardCorrosion resistance class CRC 2Maxi size
3. Main Air Preparation for High-Speed Packaging Lines
Acts as the frontline filter-regulator unit for large-scale pneumatic sorting conveyors. With a large 80 ml condensate volume and manually rotating drain, it effectively pre-filters factory air before it branches into smaller manifolds operating pneumatic pushers and grippers.
Problem SolvedPrevents erratic operation and seizing of downstream pneumatic cylinders by removing bulk condensate and contaminants from raw compressor air before it enters sensitive machine zones.
80 ml max condensate volumeFilter regulator with pressure gaugeISO 8573-1:2010 [7:8:4]Manually rotating drain1470 g weight
