1. End-of-Line Packaging Machine Pneumatic Actuation
Used to condition factory compressed air prior to distribution to pneumatic valve manifolds and cylinders on high-speed packaging equipment. The regulator ensures that incoming air is filtered and regulated to a highly stable pressure, ensuring repeatable machine cycles.
Problem SolvedPrevents erratic cylinder speeds and inconsistent mechanical timing caused by factory line pressure fluctuations. The built-in filter prevents 40 micron or larger particulate matter and moisture from damaging delicate downstream pneumatic seals.
1600 l/min standard nominal flow rate40 µm grade of filtration0.2 bar max pressure hysteresisG3/8 pneumatic connection
2. Inert Gas Shielding Regulation for Metal Fabrication
Integrated directly into inert gas distribution networks to precisely step down primary pipeline pressure for localized welding stations or atmospheric isolation chambers, utilizing its robust zinc housing and wide regulation band.
Problem SolvedSolves the issue of unstable shielding gas flow which can lead to oxidation or weld porosity. It accurately drops variable operating pressures of up to 16 bar down to a highly controlled target between 0.5 and 12 bar for safe, consistent gas delivery.
Inert gases operating medium0.5 bar ... 12 bar pressure regulation range1 bar ... 16 bar operating pressureDie-cast zinc material housing
3. CNC Machining Center Air Blow-Off Systems
Deployed as a point-of-use air preparation unit on CNC machine tools to supply filtered, regulated air for chip clearing and coolant blow-off nozzles in environments with moderate corrosion stress.
Problem SolvedEliminates the risk of spraying trapped compressor condensation onto finished machined components by capturing moisture. The rugged design safeguards the delicate internal components from flying metal chips and harsh cutting fluids.
Metal bowl guardManually rotating condensate drain22 ml max condensate volumeCorrosion resistance class CRC 2Polycarbonate (PC) material bowl
