Contact Us:
sales@inosaki.com
Contact Us:
sales@inosaki.com
$ 227.70
| Item | Specifications |
|---|---|
| Product Number | EX-FC1 |
| Part Number | EX-FC1 |
| Products Name | Simple wire-saving unit |
| Applicable regulations and certifications | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition |
| Applicable connector | SL-CP1 |
| Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Current consumption | 50 mA or less (for the unit itself), 135 mA or less (including the sensor input current when all outputs of sensors are ON) |
| Output | Relay contact 1a – Switching capacity: 30 V 1 A DC (resistive load) – Min. applied load: 10 mV 10 μA DC – Electrical lifetime: 100,000 switching operations or more (rated load, switching frequency 20 operations/min.) – Mechanical lifetime: 50 million switching operations or more (switching frequency 180 operations/min.) |
| Output:Output operation | The output relay is ON when the input signal from the sensor is ON Note : Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly. |
| Response time | 5 ms or less (excluding the response time of the sensor) |
| Input No. | 8 Nos. [PNP output type sensors (leak detection sensors, general sensors) cannot be connected.] |
| Indicators : Normal | Green LED x 8 (light up when the sensor is connected to each channel and the connection setting switch is set to ON) |
| Indicators : Error | Red LED x 8 (light up when the leak liquid is detected by a sensor connected to each channel or a sensor is mounted improperly) |
| Indicators : Output | Orange LED (lights up when the output relay is ON (normal)) |
| Ambient temperature | -10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ – 4 to +158 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Material | Enclosure: ABS, Unit mounting base: POM, Terminal part: PBT |
| Cable | 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long |
| Cable extension | Extension up to total less than 10 m 32.808 ft is possible, with 0.3 mm2, or more, cable. |
| Weight | Net weight: 85 g approx. |
| Accessory | SL-CP1 (Snap male connector): 8 pcs., MS-SL-2 (Unit mounting base): 1 pc. |
| Weight | N/A |
|---|---|
| Model |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penang
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
