GL5-L/43a/115-5M – Thru-beam Sensors – PEPPERL+FUCHS Photoelectric Sensors

Name: GL5-L/43a/115-5M – Thru-beam Sensors – PEPPERL+FUCHS Photoelectric Sensors
SKU: GL5-L/43a/115-5M
Price: 59.80 USD
Availability: InStock

$ 59.80

SKU GL5-L/43a/115-5M Category PEPPERL+FUCHS Photoelectric Sensors

In through-beam photoelectric sensing, also known as opposed mode, the transmitter and emitter are in separate housings. Light emitted from the transmitter is aimed directly at the receiver. When an object breaks the beam of light between the emitter and receiver, the receiver’s output changes state.

Through-beam sensing is the most efficient sensing mode which results in the longest sensing ranges and highest excess gain. This high gain enables through-beam sensors to be reliably used in foggy, dusty and dirty environments.

General Specifications

Light source	IRED
Light type	Infrared, continuous light , 940 nm
Target size	0.8 x 1.8 mm
Slot width	5 mm
Slot depth	8.5 mm
Ambient light limit	1000 Lux

Functional safety related parameters

MTTF_d	3760 a
Mission Time (T_M)	20 a
Diagnostic Coverage (DC)	0 %

Indicators/operating means

Function indicator

red LED lights up when receiving the light beam

Electrical specifications

Operating voltage	U_B	5 … 24 V DC , class 2
No-load supply current	I₀	max. 20 mA
Time delay before availability	t_v	< 2 ms

Output

Switching type		light/dark on
Signal output		2 PNP complementary , overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 50 mA , resistive load
Voltage drop	U_d	max. 0.2 V at 10 mA max. 0.6 V at 50 mA
Switching frequency	f	max. 5 kHz
Response time		40 µs Light beam is not interrupted 80 µs Light beam is interrupted
Repeat accuracy	R	0.03 mm