 
			 
			$ 50.60
Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.
| Item number | 2941374 | 
| Packing unit | 10 pc | 
| Minimum order quantity | 1 pc | 
| Sales key | 0612* | 
| Product key | DK61A1 | 
| Catalog page | Page 443 (C-5-2019) | 
| GTIN | 4017918080396 | 
| Weight per piece (including packing) | 22.38 g | 
| Weight per piece (excluding packing) | 18 g | 
| Customs tariff number | 85364190 | 
| Country of origin | CN | 
| Note on application | Use of EB 80-DIK… bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK… bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK… bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. | 
| Product type | Solid-state relay module | 
| Product family | DEK | 
| Application | Output function | 
| Operating mode | 100% operating factor | 
| Insulation characteristics: Standards/regulations | |
| Insulation | Basic insulation | 
| Overvoltage category | III | 
| Pollution degree | 2 | 
| Data management status | |
| Date of last data management | 17.01.2025 | 
| Maximum power dissipation for nominal condition | 0.6 W | 
| Test voltage (Input/output) | 2.5 kV AC (Input/output) | 
| Nominal input voltage UN | 24 V DC | 
| Input voltage range in reference to UN | 0.8 … 1.2 | 
| Input voltage range | 19.2 V DC … 28.8 V DC | 
| Switching threshold “0” signal in reference to UN | ≤ 0.4 | 
| Switching threshold “1” signal in reference to UN | ≥ 0.8 | 
| Typical input current at UN | 7 mA | 
| Typical response time | 40 µs | 
| Typical turn-off time | 200 µs | 
| Operating voltage display | Yellow LED | 
| Protective circuit | Reverse polarity protection | 
| Transmission frequency | 300 Hz | 
| Contact switching type | 1 N/O contact | 
| Design of digital output | electronic | 
| Output voltage range | 3 V DC … 30 V DC | 
| Limiting continuous current | 3 A (see derating curve) | 
| Voltage drop at max. limiting continuous current | ≤ 0.2 V | 
| Output circuit | 2-conductor, floating | 
| Protective circuit | Reverse polarity protection; Polarity protection diode | 
| Surge protection | 
| Connection method | Screw connection | 
| Stripping length | 8 mm | 
| Screw thread | M3 | 
| Conductor cross section rigid | 0.2 mm² … 2.5 mm² | 
| Conductor cross section flexible | 0.2 mm² … 2.5 mm² | 
| Conductor cross section AWG | 24 … 14 | 
| Tightening torque | 0.5 Nm | 
| Width | 6.2 mm | 
| Height | 80 mm | 
| Depth | 56 mm | 
| Color | green (RAL 6021) | 
| Ambient conditions | |
| Ambient temperature (operation) | -20 °C … 60 °C | 
| Ambient temperature (storage/transport) | -20 °C … 70 °C | 
| Standards/regulations | |
| Standards/regulations | IEC 60947-5-1 | 
| Mounting type | DIN rail mounting | 
| Assembly note | in rows with zero spacing | 
| Mounting position | any |