Sale!

Festo 543917 Mini Slide, 20 mm Stroke, 0.3 mm Repetition

Original price was: USD 325.26.Current price is: USD 279.76.

Ball bearing cage guided slide with adjustable end positions, 0.5 m/s maximum speed, elastic end cushioning, M3 ports and 186 g product weight.

SKU Festo-543917 Category
Festo Mini Slide

Festo DGSL-6-20-PA Mini Slide

BrandFesto
Model IdentifierDGSL-6-20-PA
Official Part Number543917

Technical Overview

The Festo DGSL-6-20-PA is a double-acting pneumatic mini slide combining a yoke drive with a ball bearing cage guide. This 20 mm stroke variant has an 8 mm piston diameter, 0.3 mm repetition accuracy and a maximum speed of 0.5 m/s. Front and rear end-position adjustment ranges are 30.5 mm and 15 mm respectively. Elastic cushioning acts at both ends with a 1.5 mm cushioning length, while proximity switches support position detection. The unit weighs 186 g, with 76 g moving mass and M3 pneumatic connections. Operation is specified from 1.5 to 8 bar and 0 to +60 °C, with documented Class 6 cleanroom suitability.

20 mm double-acting mini slide with ball bearing cage guide, adjustable end positions, 0.3 mm repetition accuracy and 0.5 m/s maximum speed.

Key Features

  • 20 mm stroke with yoke drive and 8 mm piston diameter
  • Ball bearing cage guide
  • 0.3 mm repetition accuracy
  • 0.5 m/s maximum speed
  • 30.5 mm front and 15 mm rear end-position adjustment ranges
  • Elastic end cushioning and 1.5 mm cushioning length
  • 590 N maximum force in each documented Fy and Fz direction
  • 7 Nm maximum Mx moment; 5 Nm maximum My and Mz moments
  • M3 ports, 1.5–8 bar operation and proximity-switch detection
  • 186 g product weight and Class 6 cleanroom suitability

Combine a 20 mm guided pneumatic stroke with elastic end cushioning and 0.3 mm repetition accuracy for short-travel positioning.

Technical Specification Matrix

ParameterValue
Stroke20 mm
Adjustable end position range/length front30.5 mm
Adjustable end position range/length rear15 mm
Piston diameter8 mm
Operating mode, drive unitYoke
CushioningElastic cushioning rings/plates at both ends
Mounting positionAny
GuideBall bearing cage guide
DesignYoke; Piston; Piston rod; Slide
Position detectionVia proximity switch
Operating pressure0.15 MPa...0.8 MPa; 1.5 bar...8 bar
Max. speed0.5 m/s
Repetition accuracy0.3 mm
Mode of operationDouble-acting
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 6 according to ISO 14644-1
Ambient temperature0 °C...60 °C
Impact energy in end positions0.05 Nm
Cushioning length1.5 mm
Max. force Fy590 N
Max. force Fz590 N
Max. moment Mx7 Nm
Max. moment My5 Nm
Max. moment Mz5 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke23 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke30 N
Moving mass76 g
Physical Weight (kg)0.186
alternative connectionsSee product drawing
Type of mountingWith through-hole
Pneumatic connectionM3
Note on materialsRoHS compliant
Material coverWrought aluminium alloy
Material sealsHNBR
Material housingWrought aluminium alloy
Material piston rodHigh-alloy stainless steel

Industrial Applications

1. Guided Short-Stroke Part Transfer

An assembly station moves a small handling attachment between two nearby positions. The 20 mm pneumatic stroke supplies the travel while a ball bearing cage guide supports the slide movement, combining actuation and guidance in the same unit. The double-acting yoke drive provides movement in both directions, with a documented 0.5 m/s maximum speed rather than an assumed production cycle time.

Problem Solved

Integrated pneumatic drive and ball bearing cage guidance provide a guided transfer movement without assigning unsupported lateral-load capability to an unguided piston rod alone.

20 mm stroke Ball bearing cage guide Double-acting

2. Adjustable Tool Approach and Withdrawal

A fixture needs to set the working and withdrawn positions of a small tool attachment during machine setup. This slide provides a 30.5 mm front adjustment range and a 15 mm rear adjustment range within its documented arrangement. Its 0.3 mm repetition accuracy characterizes repeated positioning, while proximity-switch detection offers a means of observing actuator position in the machine sequence.

Problem Solved

Adjustable end positions let the mechanism's travel endpoints be set mechanically, while the documented repetition accuracy and proximity-switch compatibility characterize repeat operation and position observation.

30.5 mm front adjustment 15 mm rear adjustment 0.3 mm repetition

3. Supported Motion of an Offset Attachment

A compact pneumatic mechanism carries an attachment whose offset introduces moments into the moving slide. The DGSL provides a ball bearing cage guide with separately published moment limits of 7 Nm about Mx and 5 Nm about My and Mz. Its through-hole mounting connects the unit to the machine structure, giving the designer explicit guidance and mounting characteristics for evaluating the attachment arrangement.

Problem Solved

The integrated guide and published directional moment limits provide a defined mechanical basis for carrying an offset attachment through the stroke, rather than assuming unqualified moment capacity.

7 Nm Mx 5 Nm My/Mz Through-hole mounting
Select your currency