Sale!

Festo 578301 Push-In Bulkhead Connector, 8 mm Tube, Pack 10

Original price was: USD 12.22.Current price is: USD 11.44.

Bulkhead connector with two 8 mm push-in connections, nickel-plated brass housing and nut, fluoro-rubber tube seals and 16 mm insertion depth.

SKU Festo-578301 Category
Festo Pneumatic Fittings

Festo NPQH-H-Q8-E-P10 Push-In Bulkhead Connector

BrandFesto
Model IdentifierNPQH-H-Q8-E-P10
Official Part Number578301

Technical Overview

The Festo NPQH-H-Q8-E-P10 joins 8 mm outside-diameter tubing through a bulkhead-mounted push-pull connector. Chemically nickel-plated brass housing, nut and release rings combine with fluoro-rubber tubing seals and PEI guard and thrust rings. The connector has a 20 mm external hexagon, 16 mm tube insertion depth and 40.6 g product weight.

8 mm push-in bulkhead connector with chemically nickel-plated brass housing and nut, fluoro-rubber tube seals and manufacturer pack size ten.

Key Features

  • Two push-in connections for 8 mm outside-diameter tubing
  • Bulkhead push-pull connector design
  • Manufacturer pack size ten
  • 7 mm nominal size and 16 mm tube insertion depth
  • −0.95 to 20 bar pneumatic operating range over the complete temperature range
  • 0–150 °C ambient range; water limited to 6 bar at 0–50 °C
  • Chemically nickel-plated brass housing, mounting nut and release ring
  • Fluoro-rubber tubing seal with PEI guard and thrust rings
  • 20 mm external hexagon and high-alloy stainless-steel tubing clamp
  • 40.6 g product weight, CRC 3 corrosion resistance and Class 4 cleanroom suitability

Carry an 8 mm tubing connection through a bulkhead with nickel-plated brass mounting hardware and push-in connections on both sides.

Technical Specification Matrix

ParameterValue
SizeStandard
Nominal size7 mm
Tubing insertion depth16 mm
Mounting positionAny
DesignBulkhead; Push-pull principle
Size of pack10
Operating pressure complete temperature range-0.095 MPa...2 MPa; -0.95 bar...20 bar; -13.775 psi...290 psi
Note on operating pressureWater: max. 0.6 MPa at 0 - 50 °C
Certificate issuing authorityNSF C0523185
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot mediumLubricated operation possible
Corrosion resistance class CRC3 - high corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Suitable for use with foodSee declaration of conformity; NSF/ANSI 169
Ambient temperature0 °C...150 °C
Physical Weight (kg)0.0406
Type of mountingExternal hex SW20
Pneumatic connection, port 1For tubing outer diameter of 8 mm
Pneumatic connection, port 2For tubing outside diameter of 8 mm
Colour of release ringSilver
Note on materialsRoHS compliant
Material housingBrass, chemically nickel-plated
Guard ring materialPEI
Material release ringChemically nickel-plated brass
Material nutBrass, chemically nickel-plated
Material tubing sealFluoro rubber
Material tubing clamp componentHigh-alloy stainless steel
Thrust ring materialPEI
Select your currency