Sale!

Festo 186138 Push-In L-Fitting, G1/8 to 6 mm Tube, Pack 10

Original price was: USD 9.62.Current price is: USD 9.10.

L-shaped fitting with G1/8 male thread, 6 mm push-in connection, PBT housing, nickel-plated brass hollow bolt and 17 mm tube insertion depth.

SKU Festo-186138 Category
Festo Pneumatic Fittings

Festo QSLV-G1/8-6 Push-In L-Fitting

BrandFesto
Model IdentifierQSLV-G1/8-6
Official Part Number186138

Technical Overview

The Festo QSLV-G1/8-6 connects a G1/8 female port to 6 mm outside-diameter tubing using an L-shaped push-pull fitting. Its PBT housing is mounted with a nickel-plated brass hollow bolt and external hexagon. A blue POM release ring, NBR tube seal and stainless-steel clamp support the 17 mm insertion-depth connection.

L-shaped G1/8-to-6 mm push-in fitting with nickel-plated brass hollow bolt, PBT housing and manufacturer pack size ten.

Key Features

  • Male G1/8 threaded connection to 6 mm outside-diameter tubing
  • L-shaped push-pull design with blue POM release ring
  • 4 mm nominal size and 17 mm tubing insertion depth
  • −0.95 to 6 bar operating pressure over the complete temperature range
  • Temperature-dependent operating pressure up to 14 bar; −10 to 80 °C ambient range
  • Water service requires an additional OL sealing ring and is limited to 6 bar at maximum 50 °C
  • PBT housing, nickel-plated brass hollow bolt, NBR tubing seal and stainless-steel clamp
  • Hollow-bolt mounting with external hexagon; 5.4 Nm nominal torque ±20%
  • 23 g product weight, manufacturer pack size ten and CRC 1 corrosion resistance
  • Class 4 cleanroom suitability according to the stated ISO 14644 references

Route 6 mm tubing sideways from a G1/8 port with an L-shaped push-pull fitting mounted through a nickel-plated brass hollow bolt.

Technical Specification Matrix

ParameterValue
SizeStandard
Nominal size4 mm
Tubing insertion depth17 mm
Type of seal on screwed plugSealing ring
Mounting positionAny
DesignL-shape; Push-pull principle
Size of pack10
Operating pressure complete temperature range-0.095 MPa...0.6 MPa; -0.95 bar...6 bar; -13.775 psi...87 psi
Temperature-dependent operating pressure-0.095 MPa...1.4 MPa; -0.95 bar...14 bar; -13.775 psi...203 psi
Note on operating pressureWater: max. 0.6 MPa at max. 50°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot mediumLubricated operation possible; Water: G-thread only possible with sealing ring type OL as additional; accessory
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Ambient temperature-10 °C...80 °C
Nominal torque5.4 Nm
Tolerance for nominal tightening torque±20%
Physical Weight (kg)0.023
Type of mountingHollow bolt with external hex
Pneumatic connection, port 1Male thread G1/8
Pneumatic connection, port 2For tubing outside diameter of 6 mm
Colour of release ringBlue
Note on materialsRoHS compliant
Material housingPBT
Material hollow boltBrass, nickel-plated
Material release ringPOM
Material tubing sealNBR
Material tubing clamp componentHigh-alloy stainless steel
Select your currency