Sale!

Festo 153051 R1/4 to 10 mm L-shaped Push-in Fitting

Original price was: USD 8.58.Current price is: USD 8.32.

L-shaped push-in fitting with male R1/4 thread, 10 mm tube connection, 8 mm nominal bore, SW14 hex and 23 g PBT housing assembly.

SKU Festo-153051 Category
Festo Pneumatic Fittings

Festo QSL-1/4-10 Push-in L-Fitting

BrandFesto
Model IdentifierQSL-1/4-10
Official Part Number153051

Technical Overview

The Festo QSL-1/4-10 is an L-shaped push-in fitting connecting a male R1/4 thread to 10 mm outside-diameter tubing. The 23 g PBT housing assembly with nickel-plated brass stud has an 8 mm nominal size, 20.2 mm insertion depth, coated thread seal and SW14 external hex for installation.

L-shaped R1/4 male to 10 mm tube push-in fitting with coated thread seal, SW14 hex and 23 g product weight.

Key Features

  • L-shaped push-pull fitting design
  • Male R1/4 threaded connection
  • 10 mm outside-diameter tubing connection
  • 8 mm nominal size and 20.2 mm tube insertion depth
  • Coated screw-in thread seal and SW14 external hex
  • −0.95 to 6 bar across the full temperature range; up to 14 bar depending on temperature
  • Water limited to 6 bar at maximum 50 °C; liquid, ice-free medium required
  • PBT housing and nickel-plated brass screwed plug, POM release ring, NBR tube seal and stainless steel clamp
  • 23 g product weight; Class 4 cleanroom suitability and −10 to 80 °C ambient range
  • Pack size 10 with blue release ring

Join 10 mm tubing to an R1/4 port with an L-shaped push-in connection, coated thread seal and SW14 installation hex.

Technical Specification Matrix

ParameterValue
SizeStandard
Nominal size8 mm
Tubing insertion depth20.2 mm
Type of seal on screwed plugCoating
Mounting positionAny
DesignL-shape; Push-pull principle
Size of pack10
Operating pressure complete temperature range-0.095 MPa...0.6 MPa; -0.95 bar...6 bar; -13.775 psi...87 psi
Temperature-dependent operating pressure-0.095 MPa...1.4 MPa; -0.95 bar...14 bar; -13.775 psi...203 psi
Note on operating pressureWater: max. 0.6 MPa at max. 50°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot mediumLubricated operation possible
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Ambient temperature-10 °C...80 °C
Physical Weight (kg)0.023
Type of mountingExternal hex SW14
Pneumatic connection, port 1Male thread R1/4
Pneumatic connection, port 2For tubing outside diameter of 10 mm
Colour of release ringBlue
Material screwed plugNickel-plated brass
Note on materialsRoHS compliant
Material housingPBT
Material release ringPOM
Material tubing sealNBR
Material tubing clamp componentHigh-alloy stainless steel
Select your currency