Sale!

Festo 8161414 Guided Drive, 20 mm Bore, 40 mm Stroke, PPV

Original price was: USD 310.70.Current price is: USD 267.28.

Double-acting guided actuator with plain-bearing guide, adjustable pneumatic cushioning at both ends, M5 connections and 2–10 bar operation.

SKU Festo-8161414 Category
Festo Guided Cylinders

Festo DFM-20-40-B-PPV-A-GF Guided Drive

BrandFesto
Model IdentifierDFM-20-40-B-PPV-A-GF
Official Part Number8161414

Technical Overview

The Festo DFM-20-40-B-PPV-A-GF combines a double-acting pneumatic drive with a plain-bearing guide and yoke arrangement for guided linear motion. This exact configuration has a 20 mm piston diameter and 40 mm stroke, with adjustable pneumatic cushioning at both ends to tune end-position deceleration. M5 connections supply compressed air over a 2–10 bar operating range, and proximity switches can provide position detection. At 6 bar, the specified theoretical forces are 188 N advancing and 158 N returning. The aluminium-alloy body and stainless steel piston rod operate in any mounting position within a −20 to +80 °C ambient range.

20 mm-bore, 40 mm-stroke double-acting guided drive with plain-bearing guide, adjustable pneumatic cushioning and M5 ports.

Key Features

  • Exact 40 mm stroke with 20 mm piston diameter
  • Double-acting pneumatic operation with yoke arrangement
  • Integrated plain-bearing guide
  • Adjustable pneumatic cushioning at both ends
  • 2–10 bar operating pressure and M5 pneumatic connection
  • 188 N theoretical advancing force at 6 bar
  • 158 N theoretical return force at 6 bar
  • Position detection via proximity switch
  • 0.2 J end-position impact energy; any mounting position
  • −20 to +80 °C ambient range; CRC 2 corrosion resistance

Combine a defined 40 mm guided stroke with adjustable pneumatic cushioning for compact double-acting tooling motion.

Technical Specification Matrix

ParameterValue
Stroke40 mm
Piston diameter20 mm
Operating mode, drive unitYoke
CushioningPneumatic cushioning, adjustable at both ends
Mounting positionAny
GuidePlain-bearing guide
DesignGuidance
Position detectionVia proximity switch
Operating pressure0.2 MPa...1 MPa; 2 bar...10 bar
Mode of operationDouble-acting
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 6 according to ISO 14644-1
Ambient temperature-20 °C...80 °C
Impact energy in end positions0.2 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke158 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke188 N
alternative connectionsSee product drawing
Pneumatic connectionM5
Note on materialsRoHS compliant
Material coverWrought aluminium alloy
Material sealsNBR
Material housingWrought aluminium alloy
Material piston rodHigh-alloy stainless steel

Industrial Applications

1. Short-Stroke Transfer of Handling Tooling

A compact handling unit needs to move its tooling through a defined short linear path. The drive provides a fixed 40 mm stroke with a plain-bearing guide and yoke arrangement, rather than leaving the tooling motion to an unguided piston rod alone. Adjustable pneumatic cushioning at both ends supports tuning the approach to the end positions during commissioning.

Problem Solved

An integrated guide and fixed stroke provide a defined tooling path, while adjustable end cushioning gives the machine builder a means to tune end-position deceleration.

40 mm stroke Plain-bearing guide Adjustable cushioning

2. Conveyor Stop-Gate Positioning

A conveyor workstation raises or retracts a small stop gate to position incoming parts. The double-acting drive supplies controlled pneumatic motion in both directions over its 40 mm stroke, while proximity switches can report position to the machine sequence. The guided yoke carries the gate attachment, with the gate geometry and impact loading determined by the surrounding conveyor design.

Problem Solved

Double-acting motion and provision for proximity-switch detection connect the stop gate's two positions to the conveyor sequence, while the guided arrangement defines its movement path.

Double acting 40 mm stroke Proximity-switch detection

3. Guided Seating Motion in an Assembly Fixture

An assembly fixture needs a short guided approach to seat a component against a locating feature. The 20 mm-bore drive provides a 40 mm travel and a documented 188 N theoretical advancing force at 6 bar. Its plain-bearing guide maintains the tooling path, while adjustable pneumatic cushioning supports setting the end approach for the selected fixture and process load.

Problem Solved

A guided approach combines a defined travel with a published theoretical force basis, supporting selection of a compact pneumatic seating motion for the assembly fixture.

20 mm bore 188 N theoretical at 6 bar 40 mm travel
Select your currency