Water (Standard liquid)
(Note) The agents mentioned above are examples. It may not be detected depending on viscosity the agent. Before using this device, check the detecting liquid and installation condition.
Sensing range
Water (Standard liquid)
(Note) The agents mentioned above are examples. It may not be detected depending on viscosity the agent. Before using this device, check the detecting liquid and installation condition.
Power voltage
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption
30 mA or less
Utilization category
DC-12, DC-13
Detection output(Leakage detection)
NPN open-collector transistor
– Maximum sink current: 50 mA
– Applied voltage: Same as the supply voltage (between detection output and 0 V)
– Residual voltage: 2 V or less (at 50 mA sink current)
ON when normal condition or initial detection, OFF when detection leakage or wrong installation
Detection auxiliary output(Initial detection)
NPN open-collector transistor
– Maximum sink current: 50 mA
– Applied voltage: Same as the supply voltage (between detection auxiliary output and 0 V)
– Residual voltage: 2 V or less (at 50 mA sink current)
Detection auxiliary output(Initial detection):Response time
ON when normal condition, OFF when initial detection or accidental leakage
Protection
IP65 / IP67 (IEC)
Ambient temperature
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed) (Note) Storage: -10 to +55 ℃ +14 to +131 ℉
(Note) Liquid being detected should be also kept within the rated ambient temperature range.
Ambient humidity
35 to 85 % RH, Storage: 35 to 85 % RH
Emitting element
Infrared LED (modulated)
Material
Enclosure: Polypropylene
Cable
0.18 mm2 4-core PVC cabtyre cable, 2 m 6.562 ft long
Weight
Net weight: 45 g approx
Gross weight: 110 g approx
