NX5 Series - Compact Multi-voltage Photoelectric Sensor - Panasonic Photoelectric Sensors / Laser Sensors

NX5 Series – Compact Multi-voltage Photoelectric Sensor – Panasonic Photoelectric Sensors / Laser Sensors

$ 50.60 – $ 51.70

SKU: N/A

Model

Description

Features

Multi-voltage

The NX5 series can operate at 24 to 240 V AC or 12 to 240 V DC, which makes it suitable for supply voltages around the world.

Compact size

Despite of being multi-voltage, it has a depth of just 35 mm 1.378 in. (W18 x H62 x D35 mm W0.709 x H2.441 x D1.378 in)

Long sensing range

It is most suitable for conveyor lines and parking lot applications.

High reliability

It has an IP66 protection. Moderate dust or water splashes will not affect the sensor. The hermetically sealed output relay significantly increases its reliability.

Easy alignment

The 10 m 32.808 ft thru-beam type sensor incorporate a red LED beam source. Beam alignment can be attained by checking the emitted beam visually.

Interference prevention

Two sensors can operate normally even if mounted close together.
(Excluding the 30 m 98.425 ft thru-beam type sensor)

Specifications

Type		Thru-beam
Type				Long sensing range
Model No.		NX5-M10RA	NX5-M10RB	NX5-M30A	NX5-M30B
Regulatory compliance		・Low Voltage Directive ： EN IEC 60947-5-2 ・EMC Directive ： EN IEC 60947-5-2 ・RoHS Directive ・GB/T 14048.10
Sensing range		10 m 32.808 ft		30 m 98.425 ft
Sensing object		φ20 mm φ0.787 in or more opaque object (Note 2)		φ20 mm φ0.787 in or more opaque object (Completely beam interrupted object) (Note 2)
Hysteresis		–
Repeatability (perpendicular to sensing axis)		0.1 mm 0.004 in or less		0.2 mm 0.008 in or less
Supply voltage		24 to 240 V AC ⁺¹⁰_–15 % or 12 to 240 V DC ⁺¹⁰_–15 % Ripple P-P 10 % or less
Power consumption		Emitter: 1 VA or less Receiver: 2 VA or less		Emitter: 1.5 VA or less Receiver: 2 VA or less
Output		Relay contact 1 c • Switching capacity: 250 V AC 1 A (resistive load) 30 V DC 2 A (resistive load) • Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour) 100,000 or more switching operations (switching frequency 3,600 operations/hour) • Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour)
	Output operation	Light-ON	Dark-ON	Light-ON	Dark-ON
Response time		10 ms or less
Operation indicator		Red LED (lights up when the output is ON)
Stability indicator		Green LED (lights up under stable light received condition or stable dark condition)
Power indicator		–		Red LED (lights up when the power is ON)
Sensitivity adjuster		Continuously variable adjuster		–
Automatic interference prevention function		(Use optional interference prevention filters)		–
Pollution degree		3 (Industrial environment)
Protection		IP66 (IEC)
Ambient temperature		–20 to +55 ℃ –4 to +131 ℉ (No dew condensation or icing allowed) (Note 3), Storage: –30 to +70 ℃ –22 to +158 ℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance		Incandescent light: 3,500 Lx or less at the light-receiving face
Voltage withstandability		1,500 V AC for one min. between all supply terminals connected together and enclosure, 1,500 V AC for one min. between power supply and output terminals, 1,000 V AC for one min. between relay contact terminals
Insulation resistance		20 MΩ, or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals
Vibration resistance		10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions two hours each
Shock resistance		500 m/s² (50 G approx.) in X, Y and Z directions three times each
Emitting element		Red LED (modulated)		Infrared LED (modulated)
	Peak emission wavelength	660 nm 0.026 mil		880 nm 0.035 mil
Material		Enclosure: Polycarbonate, Lens: Polycarbonate, Cover: Polycarbonate
Cable		0.3 mm² 5-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension		Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable (thru-beam type: both emitter and receiver).
Net weight		Emitter: 100 g approx. Receiver: 140 g approx.		Emitter: 125 g approx. Receiver: 140 g approx.
Accessories		Adjusting screwdriver: 1 pc.		–

Notes:

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)	If slit masks (optional) are fitted, an object as small as 3 x 6 mm 0.118 x 0.236 in can be detected.
3)	In case the sensor is to be used at an ambient temperature of –15 ℃ +5 ℉, or less, please contact our office.