AFP7TC8 – FP7 Temperature Input Units – Panasonic

$ 715.44

SKU: AFP7TC8

Specifications

Item Specifications
Product Number AFP7TC8
Part Number AFP7TC8
Number of channels 8 channels
Input range(resolution):Thermocouple(resolution: 0.1℃) K1: -100.0 to 600.0degrees / K2: -200.0 to 1000.0degrees
J1: -100.0 to 400.0degrees / J2: -200.0 to 750.0degrees
T: -270.0 to 400.0degrees / N: -270.0 to 1300.0degrees
R: 0.0 to 1760.0degrees / S: 0.0 to 1760.0degrees
B: 0.0 to 1820.0degrees / E: -270.0 to 1000.0degrees
PLII: 0.0 to 1390.0degrees / WRe5-26: 0.0 to 2315.0degrees
Input range(resolution):Voltage -10 to 10V DC (resolution: 1/62,500)
0 to 5V DC (resolution: 1/31,250)
1 to 5V DC (resolution: 1/25,000)(Note)
-100 to 100mV DC (resolution: 1/62,500)
Resolution: max. 16 bits
(Note) The full scale (F.S.) ranges of accuracy is 1 to 5 V DC for current input, respectively.
Input range(resolution):Current 0 to 20 mA (resolution: 1/31,250)
4 to 20 mA (resolution: 1/25,000)(Note)
Resolution: max. 16 bits
(Note) The full scale (F.S.) ranges of accuracy is 0 to 20 mA for current input, respectively.
Conversion speed 5 ms/channel + 5 ms (Note)
25 ms/channel + 25 ms
Add the drift compensation measuring time to the number of measuring channels.
(Note) The AC noise removal is disabled.
Overall accuracy plus or minus 0.1%F.S.or less(at +25degrees +77degrees Fahrenheit )
plus or minus 0.3%F.S.or less(at 0 to +55degrees +32 to +131degrees Fahrenheit )
Reference contact compensation accuracy plus or minus 1.0degrees (with thermocouple input)
Input impedance:Voltage 1 MOhm
Input impedance:Current 250 Ohm
Insulation method:Between input terminals and internal circuit Photocoupler and isolated DC/DC converter
Insulation method:Between channels PhotoMOS relay
Conversion execution / non-execution channel setting Selectable per channel unit
Input range change method Selectable per channel
Digital processing:Averaging Cycle, time, moving
Digital processing:Scale conversion setting Any value within plus or minus 30,000 (Voltage and current range only)
Digital processing:Offset setting Any value within plus or minus 3,000
Digital processing:Gain setting plus or minus 10%
Comparison of upper and lower limit values Selectable for one channel
Max. and min. value holding Selectable for one channel
Broken wire detection Available
Connection method Connector type terminal block

Common General Specifications

Item Specifications
Ambient temperature 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition Free from corrosive gasses and excessive dust

Indivisual General Specifications

Item Specifications
Rated voltage range –
Current consumption 80 mA or less
Net weight 145 g approx.
Accessory –
Weight 0.145 kg

Related products