PEPPERL+FUCHS Inductive proximity sensors are the preferred choice for the majority of applications requiring accurate, non-contact detection of metallic objects in machinery or automation equipment. As a pioneer and market leader, Pepperl+Fuchs offers innovative, high quality inductive sensors to meet the needs of the worldwide automation and process control markets. Our experience, flexibility and customer focus continues to allow us to offer custom designed solutions for the most unique and demanding applications.
| General specifications |
| Switching function |
Normally open/closed (NO/NC) |
| Output type |
Two-wire |
| Rated operating distance |
50 mm |
| Installation |
non-flush |
| Output polarity |
AC |
| Assured operating distance |
0 … 40.5 mm |
| Reduction factor rAl |
0.4 |
| Reduction factor rCu |
0.3 |
| Reduction factor r304 |
0.85 |
| Output type |
2-wire |
| Nominal ratings |
| Operating voltage |
20 … 253 V AC |
| Switching frequency |
0 … 20 Hz |
| Hysteresis |
typ. 3 % |
| Short-circuit protection |
no |
| Voltage drop |
≤ 5 V typ. 4V |
Momentary current
(20 ms, 0.1 Hz) |
max. 4000 mA |
| Operating current |
5 … 500 mA |
| Off-state current |
0.3 … 1 mA typ. 0.7 mA |
| Time delay before availability |
≤ 100 ms |
| Operating voltage indicator |
LED, green |
| Switching state indicator |
LED, yellow |
| Compliance with standards and directives |
| Standard conformity |
|
| Standards |
EN IEC 60947-5-2 |
| Approvals and certificates |
| UL approval |
cULus Listed, General Purpose |
| CSA approval |
cCSAus Listed, General Purpose |
| CCC approval |
Certified by China Compulsory Certification (CCC) |
| Ambient conditions |
| Ambient temperature |
-25 … 70 °C (-13 … 158 °F) |
| Mechanical specifications |
| Connection type |
screw terminals |
| Core cross section |
up to 2.5 mm2 |
| Housing material |
PBT |
| Sensing face |
PBT |
| Housing base |
PBT |
| Degree of protection |
IP68 |
| Tightening torque, housing screws |
1 Nm |
| Note |
1) In the temperature range below 0 °C, permissible operating voltage Ub 80…253 V
Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly. |
