Description: Mitutoyo Digital ABS AOS Caliper, Manufacturer Part Number 500-181-30
These Digimatic calipers allow you to take reliable measurements and offer you the following benefits:
Now equipped with the same AOS (Advanced Onsite Sensor) induction type encoder used in top-of-the-line ABS coolant-proof calipers.
Thanks to the adoption of the electromagnetic induction type ABS encoder, this caliper can be used without concern for contamination on the scale face during measurement. Detection signal is not affected by dirt (water, oil, etc.) on surface of a scale (except 300mm type).
The slider provides smooth, stable and comfortable operation.
Character height: 9mm (alleviation of fatigue with the high-contrast LCD)
The ABS (ABSOLUTE) scale requires no origin setting after power-on and also has no limit to response speed.
Extraordinary battery life
Mitutoyo Digital ABS AOS Caliper Feature:
Range:
0 – 150 mm
Depth bar:
flat
Data output:
No
Max. Permissible Error E MPE:
±0,02 mm
Max. Permissible Error S MPE:
±0,04 mm
Digital step:
0.01 mm
Max. response speed:
Unlimited
Display:
LCD, character height 9 mm (150, 200 mm) 11 mm (300 mm)
Delivered:
In a case, including 1 SR-44 battery
ORIGIN (ABS-Zero):
Yes
ON/OFF:
Yes
ABS / INC (INC ZERO):
Yes
Low voltage alarm:
Yes
Battery life:
Approx. 5 years under normal use
Mass:
168 g
Mitutoyo Digital ABS AOS Caliper Dimensions
A:
20 mm
B:
24.5 mm
C:
18 mm
D:
50 mm
H:
16 mm
Variants
All products of product family Series 500:
Digital ABS AOS Caliper
0-100mm, Rod, w/o Data Output
Mitutoyo Digital ABS AOS Caliper Part Number: 500-180-30
