Altistart 01 – Soft Start/Stop Units – Schneider Variable Speed Drives and Soft Starters

$ 395.34

SKU: ATS01N232QN

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 32A. This Altistart 01 can be used for a motor rated power up to 7.5kW or 10hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Specifications

Main
Part Number ATS01N232QN
Range of product Altistart 01
Product or component type Soft starter
Product destination Asynchronous motors
Product specific application Simple machine
Device short name ATS01
Network number of phases 3 phases
[Us] rated supply voltage 380…415 V – 10…10 %
motor power kW 15 kW, 3 phases at 380…415 V
IcL starter rating 32 A
utilisation category AC-53B conforming to EN/IEC 60947-4-2
current consumption 160 A at nominal load
Type of start Start with voltage ramp
power dissipation in W 4.5 W at full load and at end of starting
324.5 W in transient state
Complementary
Assembly style With heat sink
Function available Integrated bypass
Supply voltage limits 342…456 V
supply frequency 50…60 Hz – 5…5 %
Network frequency 47.5…63 Hz
Output voltage <= power supply voltage
[Uc] control circuit voltage Built into the starter
starting time Adjustable from 1 to 10 s
1 s / 50
10 s / 5
5 s / 10
Deceleration time symb Adjustable from 1 to 10 s
Starting torque 30…80 % of starting torque of motor connected directly on the line supply
discrete input type Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage 24…40 V
discrete input logic Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current 2 A DC-13
3 A AC-15
discrete output type Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
discrete output voltage 24 V (voltage limits: 6…30 V) open collector logic
minimum switching current 10 mA at 6 V DC for relay outputs
maximum switching current Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type 1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
Tightening torque 0.5 N.m
1.9…2.5 N.m
electrical connection 4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit
Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit
Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit
Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit
Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit
4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit
Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible with cable end 1 1…6 mm² AWG 10 power circuit
Marking CE
Operating position Vertical +/- 10 degree
Height 154 mm
Width 45 mm
Depth 131 mm
Net weight 0.56 kg
Compatibility code ATS01N2
Motor power range AC-3 15…25 kW at 380…440 V 3 phases
Motor starter type Soft starter
Environment
electromagnetic compatibility Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
Voltage/current impulse level 3 conforming to IEC 61000-4-5
Standards EN/IEC 60947-4-2
Product certifications C-Tick
CSA
CCC
GOST
UL
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
IP degree of protection IP20
pollution degree 2 conforming to EN/IEC 60947-4-2
vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance 15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation -10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage -25…70 °C conforming to EN/IEC 60947-4-2
operating altitude <= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 15.500 cm
Package 1 Width 17.500 cm
Package 1 Length 5.500 cm
Package 1 Weight 678.000 g
Unit Type of Package 2 S03
Number of Units in Package 2 14
Package 2 Height 30.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 10.058 kg
Unit Type of Package 3 P06
Number of Units in Package 3 112
Package 3 Height 75.000 cm
Package 3 Width 60.000 cm
Package 3 Length 80.000 cm
Package 3 Weight 90.140 kg
Contractual warranty
Warranty 18 months

 

Weight 0.56 kg
Dimensions 13.1 × 4.5 × 15.4 cm

Related products